1
FE Technical Forum / Re: No Cam Card
« on: February 03, 2025, 03:07:14 PM »
Cam Card for the 482 - Sent 10-22-23
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
3
Private Classifieds / Gone
« on: September 14, 2024, 07:51:37 AM »
Projects are winding down. So I have a foam mock up block with the removable heads. I will donate to a project if someone can use it. Since it is free I would like it to be picked up. I am in a southern suburb of Minneapolis. Thanks Mike.
4
Private Classifieds / Re: Free stuff for people that don't wanna buy anything!
« on: September 05, 2024, 08:36:50 AM »
Projects are winding down. So I have a foam mock up block with the removable heads. I will donate to a project if someone can use it. Since it is free I would like it to be picked up. I am in a southern suburb of Minneapolis. Thanks Mike.
5
Private Classifieds / Sold/Powermaster XS starter FE
« on: July 16, 2024, 08:32:00 AM »
Used on test stand a couple of times. $75 plus shipping.
8
Private Classifieds / Re: 445 FE/C4/QP 9inch package
« on: July 05, 2024, 05:44:44 PM »Pm sent
Response sent
9
Private Classifieds / Re: 445 FE/C4/QP 9inch package
« on: July 05, 2024, 02:47:51 PM »
Minneapolis MN, heck talk Jay into a Dyno Session and I will pay for it.
10
Private Classifieds / Re: 445 FE/C4/QP 9inch package
« on: July 05, 2024, 01:12:57 PM »
Price reduced
11
Private Classifieds / Re: Clear valve covers lighted $300.00
« on: July 03, 2024, 08:29:00 PM »
Farmington/Lakeville border on the south side of the cities.
12
Private Classifieds / Sold : Clear valve covers lighted
« on: July 03, 2024, 07:53:53 PM »
Selling a set of FE power clear valve covers. They are as new. Been sitting on the shelf in bags. 300.00 plus shipping.
13
Private Classifieds / Sold
« on: July 03, 2024, 03:05:38 PM »
For sale
445 (Pending) FE Survival heads (ported), Lykins Hydraulic roller, scat crank, Lykins non adjustable roller rockers. Blue thunder 8v intake and 600 carbs done by Drew. Along with some FE power stuff. If you want more details please ask.
QP ford 9 inch (pending) with brakes and drums 3.55 trac loc.
Engine was dyno tested and since then I changed the intake from a single carb BT and a questionable QF carb to what it has now. Also corrected rocker geometry and added the non-adjustable rockers. It is way more responsive on the stand. Not sure if it added any power but seems more responsive and idles much better. Plus the dual carbs look better. Also come with plug wires and a cast oval air cleaner (not pictured.
Asking 8500.00 to move it. Everything is new and fresh. That is about 1/2 of what I have in it. local pick up only. If it doesn't sell I will store it. Thanks for looking
Mike.
445 (Pending) FE Survival heads (ported), Lykins Hydraulic roller, scat crank, Lykins non adjustable roller rockers. Blue thunder 8v intake and 600 carbs done by Drew. Along with some FE power stuff. If you want more details please ask.
QP ford 9 inch (pending) with brakes and drums 3.55 trac loc.
Engine was dyno tested and since then I changed the intake from a single carb BT and a questionable QF carb to what it has now. Also corrected rocker geometry and added the non-adjustable rockers. It is way more responsive on the stand. Not sure if it added any power but seems more responsive and idles much better. Plus the dual carbs look better. Also come with plug wires and a cast oval air cleaner (not pictured.
Asking 8500.00 to move it. Everything is new and fresh. That is about 1/2 of what I have in it. local pick up only. If it doesn't sell I will store it. Thanks for looking
Mike.
14
Private Classifieds / Sold BBM 482
« on: October 19, 2023, 08:49:37 AM »
I am selling my 427 stroker project. Going with a different FE combination. At this point I have more engines than cars and need to get a shop built before I start on anymore. Also have just about everything to put this completely together and will make a package deal if someone is interested. I would really prefer to sell this as a local pickup.
BBM Block 4.25 stroke 4.25 Bore
Scat H Beam Rods
Scat Steel crank 4.25
FE power Adjustable timing chain and timing cover
Bullet Cams FE 287/293-10A Lift- int .688 ex .688 - int 287 ex 293. @.050 int 254 ex 260. Separation 110
Icon pistons
All machine work and assembly done by T.E.S in Bloomington MN.
$8300.00
Parts that can go with as a package or will be kept/listed once the short block sells.
BBM Heads ported by Janderson Heads in MN.
Morel 6164 lifters
Valves 2.19 int 1.68 ex
Comp Valve springs tool steel retainers
FE power Intake adapter and Weiand tunnel ram (Port matched and machined by Janderson)
FE power CVR water pump adapters
2 Quick fuel 750 dp
Harland Sharp shafts and rockers
Moroso t-pan
Precision oil pumps, Oil pump
valve covers etc.
Thanks Mike - fshgy at hotmail.com
Edited to remove crower lifters that were incorrectly listed. And carb linkage I can't locate.
BBM Block 4.25 stroke 4.25 Bore
Scat H Beam Rods
Scat Steel crank 4.25
FE power Adjustable timing chain and timing cover
Bullet Cams FE 287/293-10A Lift- int .688 ex .688 - int 287 ex 293. @.050 int 254 ex 260. Separation 110
Icon pistons
All machine work and assembly done by T.E.S in Bloomington MN.
$8300.00
Parts that can go with as a package or will be kept/listed once the short block sells.
BBM Heads ported by Janderson Heads in MN.
Morel 6164 lifters
Valves 2.19 int 1.68 ex
Comp Valve springs tool steel retainers
FE power Intake adapter and Weiand tunnel ram (Port matched and machined by Janderson)
FE power CVR water pump adapters
2 Quick fuel 750 dp
Harland Sharp shafts and rockers
Moroso t-pan
Precision oil pumps, Oil pump
valve covers etc.
Thanks Mike - fshgy at hotmail.com
Edited to remove crower lifters that were incorrectly listed. And carb linkage I can't locate.