Performance Summary:
Cubic Inches: 433 Dyno brand: Stuska
Power Adder: N/A Where dynoed: Dale Meers Racing Engines, Buffalo, KY
Peak Horsepower: 422
Peak Torque: 467
Horsepower and Torque Curves:
Engine Specifications:
Block brand, material, finished bore size, other notes: Factory 428 CJ, 4.165"
Crankshaft brand, cast or forged, stroke, journal size: Factory CJ
Connecting Rods brand, material, center to center distance, end sizes, bolts: Scat H-beam, 6.490
Piston brand, material (caster, hypereutectic or forged), dish/dome volume, static CR: Diamond
Main Bearings, Rod Bearings, Cam Bearings brand and size: Federal Mogul/Federal Mogul, Durabond
Piston rings brand, size, other notes: Total Seal, 1/16, 1/16, 3/16
Oil Pump, pickup, and drive: Melling HV
Oil pan, windage tray, oil filter adapter: CJ Repop, Ford windage tray, Ford CJ filter adapter
Camshaft brand, type (hyd/solid, flat tappet or roller), lift and duration (adv and @.050"): Custom Comp Cams hydraulic roller, 227/233 @ .050", 112/104, .583/.572
Lifters brand, type: Morel
Timing chain and timing cover: Ford Racing/factory
Cylinder heads brand, material, port and chamber information: Factory 427 CJ, no port work, valve job
Cylinder head flow in cfm at inches of lift (28" H2O pressure drop):
Intake Exhaust
.100 .100
.200 .200
.300 .300
.400 .400
.500 .500
.600 .600
.700 .700
.800 .800
Flow bench used, location:
Intake valve brand, head size, stem size: Ferrea, 3/8, 2.09
Exhaust valve brand, head size, stem size: Ferrea, 3/8, 1.65
Valve springs brand, part number, specs: Comp 914-16
Retainers and locks brand, part number, specs: Comp 741/609
Rocker arm brand, type (adjustable or non-adj), material, ratio: Harland Sharp
Rocker shafts and stands, brand, material: Harland Sharp
Pushrods brand, type, length: Trend 5/16, Ball/Cup
Valve covers, brand, type: Factory
Distributor brand, advance curve information: Factory, steel gear
Harmonic balancer brand: Factory repop
Water pump brand, type (mechanical or electric): Factory repop
Intake manifold brand, material, porting information: Factory cast iron, no port work, 78 lbs.......yep
Carburetor(s) brand, type: Holley
Exhaust manifolds or headers brand, type: