FE Dyno Results and Engine Information

[jayb]

This board is for posting information on the dyno results you have for your FE engine.  I have put a suggested format below, and put a couple of example engines on the board to start with.  You can copy the format from this sticky, and paste it into your post, and then fill in the information.  If you don't have all the info (very few people will), don't sweat it, just fill in what you have.  If you have a photo of the engine, either on or off the dyno, please post that also.  Comments always welcome.  Hopefully this board will turn into a useful repository of FE engine data.

**********************************************************************************************************

Performance Summary:
      Cubic Inches:               Dyno brand:
      Power Adder:               Where dynoed:
      Peak Horsepower:
      Peak Torque:

Horsepower and Torque Curves:


Engine Specifications:
   Block brand, material, finished bore size, other notes:
      
   Crankshaft brand, cast or forged, stroke, journal size:
      
   Connecting Rods brand, material, center to center distance, end sizes, bolts:

   Piston brand, material (caster, hypereutectic or forged), dish/dome volume, static CR:

   Main Bearings, Rod Bearings, Cam Bearings brand and size:

   Piston rings brand, size, other notes:

   Oil Pump, pickup, and drive:

   Oil pan, windage tray, oil filter adapter:

   Camshaft brand, type (hyd/solid, flat tappet or roller), lift and duration (adv and @.050")

   Lifters brand, type:

   Timing chain and timing cover:

   Cylinder heads brand, material, port and chamber information:

   Cylinder head flow in cfm at inches of lift (28" H2O pressure drop):
      Intake               Exhaust
      .100               .100
      .200               .200
      .300               .300
      .400               .400
      .500               .500
      .600               .600
      .700               .700
      .800               .800

   Flow bench used, location:

   Intake valve brand, head size, stem size:

   Exhaust valve brand, head size, stem size:
   
   Valve springs brand, part number, specs:

   Retainers and locks brand, part number, specs:

   Rocker arm brand, type (adjustable or non-adj), material, ratio

   Rocker shafts and stands, brand, material:

   Pushrods brand, type, length:

   Valve covers, brand, type:

   Distributor brand, advance curve information:

   Harmonic balancer brand:

   Water pump brand, type (mechanical or electric):

   Intake manifold brand, material, porting information:

   Carburetor(s) brand, type

   Exhaust manifolds or headers brand, type:

[Mike Caruso]

Jay, 

Great Idea one place for all to go and do their own digging. This will save a lot a questions asked in Forums. Sure there will still be questions but at higher level. Again Great job. Happy Easter

Mike

[69ramair]

Sorry posted in the wrong place please delete
**********************************************************************************************************

Performance Summary:
      Cubic Inches:   464            Dyno brand:SF 902 Pro
      Power Adder:   n/a            Where dynoed: Pro Street Dino plus
      Peak Horsepower:588.6
      Peak Torque: 605

Horsepower and Torque Curves:


Engine Specifications:
   Block brand, material, finished bore size, other notes: C scratch
      
   Crankshaft brand, cast or forged, stroke, journal size: 4.25 scat
      
   Connecting Rods brand, material, center to center distance, end sizes, bolts: scat I beam

   Piston brand, material (caster, hypereutectic or forged), dish/dome volume, static CR: Mahle 20 cc dish. 10.3

   Main Bearings, Rod Bearings, Cam Bearings brand and size:

   Piston rings brand, size, other notes: Mahle 1mm 1mm 3mm

   Oil Pump, pickup, and drive:Melling HV

   Oil pan, windage tray, oil filter adapter: Canton 15-850

   Camshaft brand, type (hyd/solid, flat tappet or roller), lift and duration (adv and @.050") 235 / 246.

   Lifters brand, type: morel

   Timing chain and timing cover: closes

   Cylinder heads brand, material, port and chamber information: OTB TFS

   Cylinder head flow in cfm at inches of lift (28" H2O pressure drop):
      Intake               Exhaust
      .100               .100
      .200               .200
      .300               .300
      .400               .400
      .500               .500
      .600               .600
      .700               .700
      .800               .800

   Flow bench used, location:

   Intake valve brand, head size, stem size:

   Exhaust valve brand, head size, stem size:
   
   Valve springs brand, part number, specs:

   Retainers and locks brand, part number, specs:

   Rocker arm brand, type (adjustable or non-adj), material, ratio : Lykins

   Rocker shafts and stands, brand, material: POP

   Pushrods brand, type, length: Manton  11/32  .120 wall

   Valve covers, brand, type: CJ aluminum

   Distributor brand, advance curve information: Dura spark

   Harmonic balancer brand: Power Bond

   Water pump brand, type (mechanical or electric): aluminum electric on Dyno

   Intake manifold brand, material, porting information: Streetmaster home ported

   Carburetor(s) brand, type : 780 quick fuel

   Exhaust manifolds or headers brand, type: 2” dyno headers then switched to hooker 6114
[/quote]