« previous next »
Pages: [1]

Author Topic: ARP rocker stud torque  (Read 1404 times)

0 Members and 1 Guest are viewing this topic.

allrightmike

  • Sr. Member
  • ****
  • Posts: 255
    • View Profile
ARP rocker stud torque
« on: February 08, 2025, 09:39:10 AM »
  Despite my meticulous record keeping methods (huh?) I cannot find the data slip for my ARP rocker mounting studs. Not wanting to guess at it, someone please chime in with the torque spec for said studs. Thanks.
Logged

DuckRyder

  • Full Member
  • ***
  • Posts: 225
    • View Profile
Re: ARP rocker stud torque
« Reply #1 on: February 08, 2025, 11:53:34 AM »
Logged
Robert

allrightmike

  • Sr. Member
  • ****
  • Posts: 255
    • View Profile
Re: ARP rocker stud torque
« Reply #2 on: February 08, 2025, 01:10:52 PM »
Yup, thanks.
Logged

6667fan

  • Hero Member
  • *****
  • Posts: 778
  • Every Second Counts
    • View Profile
Re: ARP rocker stud torque
« Reply #3 on: February 10, 2025, 09:48:29 AM »
I have always done them to 50 lbs. That is higher than the pdf indicates.
Logged
JB


67 Fairlane 500
482 cid 636/619.
Tunnel Wedge, Survival EMC CNC heads, Lykins Custom Hydraulic Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.55@125.74 1.46 60’

blykins

  • Hero Member
  • *****
  • Posts: 5044
    • View Profile
    • Lykins Motorsports
Re: ARP rocker stud torque
« Reply #4 on: February 10, 2025, 10:26:00 AM »
I'm usually a 40-45 lb-ft kinda guy. 
Logged
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

pbf777

  • Hero Member
  • *****
  • Posts: 575
    • View Profile
Re: ARP rocker stud torque
« Reply #5 on: February 10, 2025, 12:29:59 PM »
    Yep, from the installation instruction sheet:  "Once the rocker shaft is pulled down into place, tighten the nuts to 35 ft-lbs if using ARP assembly lubricant or 40-45 ft-lbs if using engine oil".

    I'd recommend pretty much sticking to this recommendation.   :)

    Scott.
Logged

allrightmike

  • Sr. Member
  • ****
  • Posts: 255
    • View Profile
Re: ARP rocker stud torque
« Reply #6 on: February 13, 2025, 10:21:25 AM »
10-4 that.
Logged
Pages: [1]
« previous next »