Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sixty9cobra

Pages: [1] 2 3 ... 18
1
Non-FE Discussion Forum / Re: Weigh in time for the wagon.....
« on: September 16, 2022, 10:27:56 AM »
Joe my neighbor has scales

2
Non-FE Discussion Forum / Re: 2022 FE Race and Reunion.
« on: September 07, 2022, 11:07:55 AM »
I will be going Thursday morning to spectate. I have reservations at Quality in at Selinsgrove I hope to see some familiar faces.

3
FE Technical Forum / Re: 427 popping through the carburetors during acceleration and no power above 3500
« on: August 24, 2022, 07:34:44 PM »
How old are the valve springs?

4
Private Classifieds / Re: 1957 Ranchero
« on: November 16, 2021, 06:23:09 PM »
Looks like $4800.

5
FE Technical Forum / Re: exhaust change
« on: October 05, 2021, 10:27:13 AM »
I run Magnaflow system with tailpipes 3 inch with an x pipe quite loud and has a different sound but I can live with it. I have some vids on youtube at Beraver. Search hbomb49

6
Non-FE Discussion Forum / Re: Almost ready for RMRW 2.0
« on: August 19, 2021, 08:54:09 PM »
sounds healthy

7
Member Projects / Re: 482 SOHC "Saleen Cammer" update
« on: July 19, 2021, 02:02:14 PM »
NM

8
Non-FE Discussion Forum / Re: Headers
« on: July 05, 2021, 06:48:37 PM »
I had Hooker 6114 JET HOT ceramic coated and they crumbled and rusted after a few yrs. I sent them to Swain tech coatings upstate NY. They blasted them and coated them in and out. Its a flat finish. When I blew the last motor I panted them with VHT ceramic paint and  4 yrs later and they still look good. I should say that you can paint over their coatings.

9
FE Technical Forum / Re: Switch to Tremec and lower clutch rod is short?
« on: May 29, 2021, 11:37:03 PM »
I changed that to a heim joint and threaded rod. Drilled out the stud in the z bar.

10
Non-FE Discussion Forum / Re: 1969 Mustang disc brakes
« on: May 17, 2021, 10:57:35 PM »
where does the residual pressure valves live? I had discs before I went manual disc is this something I should have added? The electric steering unit is from a Prius 150 on eBay some cutting and welding and it lives under the dash.

11
Non-FE Discussion Forum / Re: 1969 Mustang disc brakes
« on: May 14, 2021, 08:52:43 PM »
Update on electric steering I must say I am pleased all the slop is gone. I am not so pleased with the manual disks pedal travel is a lot and needs lots of effort. It will do for this summer but I will need to do something better than the manual brake pedal and the Granada master cylinder.

12
FE Technical Forum / Re: battle wounds
« on: May 11, 2021, 07:41:19 PM »
Try doing that on blood thinners it will look like a crime scene.

13
Non-FE Discussion Forum / Re: What is the new recommended engine oil of choice for our old style rides.
« on: April 26, 2021, 03:30:56 PM »
I am using Mobile 15-50 was going to try Amsoil 10-40 or 20-50 I like the higher oil pressure with the 20-50. I am running a 700 lift roller cam not sure I need a lot of zinc.

14
Non-FE Discussion Forum / Re: 1969 Mustang disc brakes
« on: March 19, 2021, 09:36:06 AM »
Thanks for the info manual pedal and master on their way. Looks like Grenada is the same also. First thing is to get the steering done had a few things welded so now just to assemble and wire it.

15
Non-FE Discussion Forum / Re: Guess the reaction
« on: March 16, 2021, 12:14:29 PM »
Got my first shot yesterday arms hurts thats it so far.

Pages: [1] 2 3 ... 18