Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - fekbmax

Pages: [1] 2 3 ... 99
1
FE Technical Forum / Re: Who Would Have Thought 60+ Years Ago What The FE Was Capable Of...
« on: June 27, 2025, 06:06:55 PM »
Lots of info on it on Jay's FB page. I believe That's Bruce Faulkner's engine.  He pops in here from time to time, maybe he will share some info at some point. Jay Zolko is one of the top ford engine builders on the planet. Bruce is 100% (max performance) FE through and through.  The combustion chamber they designed for those heads are a work of art.
JMO.

2
FE Technical Forum / Re: What's the highest horsepower and hp/ci that you've seen....
« on: May 22, 2025, 10:45:56 AM »
Yes, those are the Visner billet heads I believe.  I actually sent the wrong video. 

These are cast FE heads highly worked by Jim and Jeff.  Either Blue thunder or pro ports I would imagine

https://youtu.be/OKfWGll-Umw

3
FE Technical Forum / Re: What's the highest horsepower and hp/ci that you've seen....
« on: May 22, 2025, 08:02:41 AM »
https://youtu.be/OF6yJscOp58?si=K4cHNGiddiqgHRZ_

4
FE Technical Forum / Re: Roller lifter crossbar pin rubs on the valley wall
« on: April 11, 2025, 04:02:20 PM »
I have always placed link bars towards center of valley. 

5
FE Technical Forum / Re: recessed ares for cross bolt washers
« on: March 04, 2025, 11:44:54 PM »
I use a spot facing bit.

6
Private Classifieds / Re: Some stuff
« on: March 02, 2025, 09:02:28 PM »
Wiggins fittings sold.
New price on valve covers.
$350.oo

7
FE Technical Forum / Re: motor oil
« on: February 15, 2025, 05:20:46 PM »
Driven
https://www.drivenracingoil.com/?gad_source=1&gclid=CjwKCAiAk8G9BhA0EiwAOQxmfjP0nRwhAnawEXqHusvs_Qt7LuLUEQJ_eFbMAjiJUAXA-mZaSYG3SBoCltYQAvD_BwE

8
FE Technical Forum / Re: intake leak
« on: January 10, 2025, 11:11:24 PM »
I have done several intakes with the tried and true original JB weld over the years. I have an old port O sonic that I did 8 pushrod tube's in over 30 years ago, ran it hard for 5 years or so and wouldn't hesitate to put it back on an engine now.

9
FE Technical Forum / Re: intake leak
« on: January 10, 2025, 07:41:50 PM »
+3 on JB weld or splash zone.

10
Private Classifieds / Re: Some stuff
« on: January 04, 2025, 10:56:26 PM »
Added FE power rocker covers.

11
FE Technical Forum / Re: Plate to Preassure check FE heads
« on: December 29, 2024, 06:04:56 PM »
I use a torque plate and a piece of gasket material. 
An old head and sheet of gasket material works.

12
Non-FE Discussion Forum / Future of Jerico
« on: December 21, 2024, 01:49:51 PM »
Anyone know the real scoop on Jerico ?
I have heard so many rumors the past few days including,
Shut down for good due to embezzlement.
Bankruptcy.
New owner taking over but just making service parts.
G force acquiring them.

13
Member Projects / Re: Project 503 aluminum FE
« on: December 09, 2024, 09:05:52 PM »
Did some swapping a couple weeks ago at the swap meet and picked up a couple pairs.  Used the most basic for the dyno headers. 

14
Non-FE Discussion Forum / Re: Happy Thanksgiving.
« on: November 28, 2024, 08:15:56 AM »
Happy Thanksgiving, hope a) are doing well and have a great holiday season..

15
Member Projects / Re: Project 503 aluminum FE
« on: November 07, 2024, 11:36:20 PM »
After a 6 month hiatus on this project I was finally able to un bag it and start back working on it some, atleast on the weekends during October.  Spent most of the summer working over on the eastern shore  and burning up alot of my vacation days on Thursday and Friday's going to all but one of the pdra races.  It was a busy summer to say the least. Racing season is over and I'm finaly working back close to home so it's time to get back to work on this thing.

Pages: [1] 2 3 ... 99