Ehhhh just ignore it. He used a bunch of my calibration info years ago and grossly misunderstood it.
He ended up using 76 jets in 2x4 550cfm carbs and his conclusion was that the FE just doesn’t make any power.
Couldn’t be more ignorant.

Either way, killer build.

Totally common with secondaries.
In theory they should shut on their own, in practice not always.
Adjust closing link to be a little tighter.

Oh, and trying ti make it dual inlet…. That isn’t something I do on a one off type deal.
Yes I can do it, takes awhile to fixture up on the mill so I normally don’t do until I have 30-40 bowls.
Also due to the thin casting, the fatality rate is high. Ie many bowls get too thin right before the needle.


More pics
https://www.facebook.com/share/15GuHyPd8T/?mibextid=WC7FNe

Hurricane if we are gonna be technical.

Yeah, everything is going to be shut down for a month here. Is pretty bad everywhere.

Hey Rory, I will take the heads and carbs at the reunion.

Perfect. Better an end user get them.
65-73 ones are identical in all ways, best size for a small stroker

Oh good, happy to hear.
I hate when these little details get ignored… simple parts, simple problems.
Let me know if I can help get it dialed in as you go, happy to help.

Oh and sorry if I let the Boss9 cat outta the bag Jay.

At least I posted it in the right forum, not like the Lykins fella showing us Clevelands we don’t wanna see 😂😂😂😂