1
Member Projects / Re: 66 Fairlane Reborn
« on: June 24, 2024, 11:44:07 AM »
The export brace setup. Is that home made.
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Private Classifieds / Re: For Sale :-Trick flow heads and TFS tunnelwedge intake package
« on: June 21, 2024, 10:15:34 PM »
Nice wish I had some extra money.
3
Non-FE Discussion Forum / Re: Another time....
« on: June 21, 2024, 09:31:36 AM »
And who is she Jay. You just skimmed over that.
4
FE Technical Forum / Re: Puzzle Time
« on: June 16, 2024, 08:38:28 PM »
Unless you have a lot over overlap on that cam I think 140 is a little on the low side. I’m thinking around 175-180. I could be wrong.
5
Non-FE Discussion Forum / Happy fathers day
« on: June 16, 2024, 11:30:28 AM »
Just want to wish everyone a happy Father’s Day.
6
FE Technical Forum / Re: FE in a 65 Fastback thread
« on: June 14, 2024, 05:35:55 PM »
Alan casida has one but I think your talking about the red one with white stripes. I think his name is turbo hunter.
7
FE Technical Forum / Re: FE in a 65 Fastback thread
« on: June 13, 2024, 07:31:15 PM »
Yes beautifully done car.
8
Vendor Classifieds / Re: New Meziere Polished Water Pump
« on: June 11, 2024, 10:20:06 PM »
10 to 13 horse is nothing to sneeze about didn’t know it was that much. And I do like the idea of circulating the water while the car is off.
9
FE Technical Forum / Re: Puzzle Time
« on: June 11, 2024, 10:16:44 PM »
Hmm pull some plugs and read them see if any anti freeze on them or a tinge of green. How does it idle is it missing or running rough.
10
FE Technical Forum / Re: Flexplate
« on: June 10, 2024, 11:02:36 PM »
I’ve been using the hurst quarter stick for a long time. I had a mega shifter before this and it was finicky but you could get it to work. I lost a race because of it and bought the hurst. Was looking into a winters shifter I like them but until I my shifter breaks why change.
12
Vendor Classifieds / Re: New Meziere Polished Water Pump
« on: June 09, 2024, 08:38:44 PM »
Besides a few horsepower does an electric pump cool better.?
13
FE Technical Forum / Re: Flexplate
« on: June 09, 2024, 08:36:52 PM »
I had just had ATI give me an additional .020 clearance using my stock flexplates. On the stock flexplates were the converter touches the flexplates the plate bows out. The ATI flexplate is flat. With the stock plate I had .100 with the extra .020 I figured I’d be good. Now I have around .270. Well I made some spacers which are going to give me .135. I tell ya every time I touch something it causes another problem. Well I dropped the motor in today so I’m a little closer.
15
FE Technical Forum / Re: Update: Engine noise - roller lifter Another update 6/8/24
« on: June 08, 2024, 07:39:56 PM »
I agree I would at least take intake off and take all lifters out and check all pushrods and cups on rockers. Maybe pull dizzy and check oil that comes out at mdifferent places and see if any debris are coming out. I know pain in the ass but you should at least do that. These motors are expensive I think you have to be careful.. JMO