Author Topic: auto to manual swap question  (Read 897 times)

0 Members and 1 Guest are viewing this topic.

fryedaddy

  • Hero Member
  • *****
  • Posts: 1252
    • View Profile
auto to manual swap question
« on: February 04, 2021, 12:27:19 PM »
i took the auto trans out of my comet and im going back to manual trans.question is,do i use the spacer off the old flexplate-the round spacer that the flexplate bolts go through. do i use it on the manual flywheel.i dont think so but i wanted to be sure
1966 comet caliente 428 4 speed owned since 1983                                                 1973 f250 ranger xlt 360 4 speed papaw bought new

Gregwill16

  • Sr. Member
  • ****
  • Posts: 468
    • View Profile
Re: auto to manual swap question
« Reply #1 on: February 04, 2021, 12:45:19 PM »
No, just it is just reinforcement for the auto flywheel.

6667fan

  • Hero Member
  • *****
  • Posts: 719
  • Every Second Counts
    • View Profile
Re: auto to manual swap question
« Reply #2 on: February 04, 2021, 04:31:41 PM »
Three pedals again, yessssss. Is the clutch pedal still in there?
JB


67 Fairlane 500
482 cid 636/619.
Tunnel Wedge, Survival EMC CNC heads, Lykins Custom Hydraulic Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.68@125.71 1.56 60’

fryedaddy

  • Hero Member
  • *****
  • Posts: 1252
    • View Profile
Re: auto to manual swap question
« Reply #3 on: February 05, 2021, 01:30:41 PM »
Three pedals again, yessssss. Is the clutch pedal still in there?
clutch pedal still in car all i need now is a new clutch kit and a steel flywheel,i bought a new shifter out of my stimulus,i hope another one will buy my clutch and flywheel.if not its eating away at me right now to push the buy now button.
1966 comet caliente 428 4 speed owned since 1983                                                 1973 f250 ranger xlt 360 4 speed papaw bought new