482 going on pump. Guess the HP version 2.0, prize to winner.

[6667fan]

Hmm, 6s and 7s. Something familiar about those numbers

[shady]

598

[blykins]

Did you get to dyno it?

[6667fan]

Its done, picking it up this week. I wanted to let the dust settle on yours Brent.
 Anyone wants to get a guess in I’ll be posting results later this week, gotta get the printouts and such.
Be well all.

JB

[fryedaddy]

627 hp

[447 Stroker]

605

[6667fan]

Peak hp 636, (uncorrected). Like the last version of this engine it hit a peak number at 6100 and then came back a few hundred rpms later with the same number. Torque down around 10 ft lbs. Disregard the A/F numbers, the hats for this dyno were not working correctly. I convinced the owner to let me bring in a new wide band and it was a good thing or there would have been no A/F data at all. Motor made most power at 13.2-13.5. I requested that fuel be added just to make sure it was being given enough. The A/F went to 12.8 and engine lost power.
 Also this engine liked 1” Super Sucker spacers with the open hole.

I have turbohunter coming in as the winner at 635. Send me a pm with your address please.

JB

[blykins]

Great strip engine, held the peak plus or minus 4-5 hp from 5700-6600.  Nice and flat on top. 

[1968galaxie]

Well done!
Going into the Fairlane I assume?
Street car or track?
If track how did it do before refreshening?

Cheers

[6667fan]

Street car that would like to get to low 11s with. Made two passes with previous version of engine in October. Go to the Drag Strip Results which is part of Technical Forum. Scroll down to Had my Fairlane at track day.

JB

[turbohunter]

Wooohooo
More money for my toilet paper castle.