Author Topic: Lykins Motorsports non-adjustable roller rockers in stock, 9.26.20 (Read 8320 times)

blykins · « **on:** May 22, 2019, 12:39:48 PM »

Another shipment coming in Monday.

67428GT500 · « **Reply #1 on:** May 22, 2019, 12:53:34 PM »

Donating parts?

blykins · « **Reply #2 on:** May 22, 2019, 02:34:31 PM »

Yep, $450 and I'll donate a set to any cause.

Hey, pay $900 for one set and I'll even throw a set in for free.

67428GT500 · « **Reply #3 on:** May 22, 2019, 02:36:00 PM »

I have dove rollers, but if I break one I will definitely be coming to you.

shady · « **Reply #4 on:** May 22, 2019, 03:26:27 PM »

My motto is charge double and give 50% off. They are pretty, I just couldn't resist taking a peek at them.

blykins · « **Reply #5 on:** July 25, 2019, 05:55:22 AM »

Rockers are here. Get 'em while they're hot.

I can also package these up with HS shafts and POP stands.

My427stang · « **Reply #6 on:** July 25, 2019, 06:48:21 AM »

Brent, I need a third set, keep them coming!

FYI - If any of you are on the fence, what an easy decision during a build. I was going to do a write up, but what kind of write up can you do when you just bolt them on, check pushrod length, buy cheaper pushrods because they are common size, gain pushrod clearance, etc? They are just easy and nice.

Also FYI - They fit at .630 lift under PBF valve covers if you squeeze the baffles a little with a pair of channel locks...easy job, at more normal lift, I'd expect no issues at all, and tons of room with pentroofs, both cast alum and steel

I guess that was a write-up

Arizona ‘58Mercury · « **Reply #7 on:** August 10, 2019, 08:06:27 PM »

So what’s it run for the whole set up? Rockers, shafts and pop ups

blykins · « **Reply #8 on:** August 11, 2019, 11:52:44 AM »

Pop ups? You mean stands?

Arizona ‘58Mercury · « **Reply #9 on:** August 14, 2019, 01:03:29 PM »

Yes, I miss read what you put above.

blykins · « **Reply #10 on:** August 14, 2019, 01:09:35 PM »

Complete kit for a LR/MR combination would be $910, including rockers, HD shafts, billet end stands, billet center stands, and billet spacers.

Arizona ‘58Mercury · « **Reply #11 on:** August 14, 2019, 01:42:01 PM »

I got my cam and lifters through you, I’ll be in touch on these as well. Thank you

e philpott · « **Reply #12 on:** August 14, 2019, 03:58:09 PM »

Quote from: blykins on August 14, 2019, 01:09:35 PM

Complete kit for a LR/MR combination would be $910, including rockers, HD shafts, billet end stands, billet center stands, and billet spacers.

Sweet deal Brent !!

Sand hauler · « **Reply #13 on:** August 20, 2019, 08:31:13 PM »

Can I use the PAC 1940 springs with these,or would I need to use a smaller dia spring?

blykins · « **Reply #14 on:** August 21, 2019, 04:38:36 AM »

They will clear/fit just fine.

Sand hauler · « **Reply #15 on:** August 21, 2019, 05:55:12 AM »

Thank you sir,will definitely be ordering some

blykins · « **Reply #16 on:** August 21, 2019, 06:18:27 AM »

2 sets left on the shelf....

Arizona ‘58Mercury · « **Reply #17 on:** January 04, 2020, 05:49:16 PM »

How are these performing? Any feedback on them?

My427stang · « **Reply #18 on:** January 04, 2020, 06:43:35 PM »

I have used three sets, couldn't be easier and no issues at all.

Going to buy at least one more set in the next month or so.

blykins · « **Reply #19 on:** January 23, 2020, 05:28:26 PM »

Shipment is here.

My427stang · « **Reply #20 on:** January 23, 2020, 05:34:36 PM »

I need another set!

drdano · « **Reply #21 on:** January 23, 2020, 05:46:40 PM »

Get in line!

My427stang · « **Reply #22 on:** January 23, 2020, 07:13:54 PM »

Quote from: drdano on January 23, 2020, 05:46:40 PM

Get in line!

I think I have the most frequent flier miles

blykins · « **Reply #23 on:** May 11, 2020, 01:49:46 PM »

Rockers in stock!

DubyaTF · « **Reply #24 on:** July 06, 2020, 10:39:07 AM »

Any sets of rockers left? I sent a PM with a couple questions. Thanks for your time!

blykins · « **Reply #25 on:** July 06, 2020, 11:03:21 AM »

Shot you a PM back.

DubyaTF · « **Reply #26 on:** July 14, 2020, 01:54:30 PM »

Received my rocker set last night. Everything looks good. Thanks very much!

News:

Author Topic: Lykins Motorsports non-adjustable roller rockers in stock, 9.26.20 (Read 8320 times)