Factory 3x2 complete set up, and early med riser 4v intake

[428kidd]

Mine over on the old FE forum. Thanks as always to Jay for the great site!

http://www.network54.com/Forum/75943/message/1505359579/Factory+Ford+3x2+set+up

[FERoadster]

Lance: I'm not making an offer on the intake but would like a close-up photo of the Bird on the air cleaner. I've got a number of original tops and would like to see if the Bird is cast in or added after the fins were milled off. Might just do that myself.

Richard >>> FERoadser

[428kidd]

Knocked $100.00 off the price shipped . Price lowered , bump. Oh and Richard, I still haven't forgot you on the close up of the air cleaner, just been real busy. Thanks Lance

[FERoadster]

Lance: the reason I asked is that I've got at least 2 or 3 other Ford aircleaner styles and yours would make it  maybe 4.
Is the Bird an emblem epoxied/bolted to the casting or is it cast in?
I'll get a picture of the 3 lid types I have and post it here.

Richard 

[428kidd]

Richard , it is a emblem. I'm not at home , so I cant look to see if it goes through the back side. These where used on Tbird ,M code stuff. The air cleaners are hard to find and usually fetch $200 to $300 depending on who wants them. I am sorry I haven't gotten you pictures. I have been to work and on the road for the last three weeks. So I been mowing and everything else when home . No rest at all. I hope to slow down in a day or two . Thanks Lance

[428kidd]

Bump guys , price dropped again on the 3x2 set up, very nice set up and complete . Hard air cleaner to find. $1650.00 shipped on 3x2 and $450.00 on the 4V. Would like to sale before  , but will stick them on EBay next week if not. Thanks guys