Author Topic: Drag Week 2016 - Random Viewer Updates (Read 24219 times)

jgkurz · « **on:** September 12, 2016, 11:34:20 AM »

Just saw Scott Miller in the red Cougar run 9:18 @ 131. Big wheelie!

Can't timestamp due to the livefeed.

https://youtu.be/rzmetUWCbVs

Qikbbstang · « **Reply #1 on:** September 12, 2016, 12:03:00 PM »

Quote as Jay's SHELBY came to the line Drag Week Day1

".....If you don't enjoy Jay Brown's 1969 Mustang your opinion is wrong. 585 inches of FE Power because frankly, that is the only thing Jay puts in everything he drives.
8.94 at a buck-fifty!
Naturally Aspirated!"

CaptCobrajet · « **Reply #2 on:** September 12, 2016, 12:13:54 PM »

Scott hit the chip at 1000 feet....coasted to a 9.18, hence the 131 mph. Missed on gear selection just a little. They are gonna bump the chip 400 rpm. Probably get in the 8s but still won't quite make the finish line.......until the last day, lol. Jack said he went 1.25 in 60' leaving off idle, no trans brake, still 300 lbs over the min at 3300.

Nice run for Mr. Jay. Hope all the FEers have a good trip!+

Qikbbstang · « **Reply #3 on:** September 12, 2016, 12:20:15 PM »

The Classic worded as announced:-

" Doug Smith from Agera, Ohio
1961 Mustang Mach 1 with a 427
Is that an FE or like a Windsor stroker under the hood?
Don't Know .
Got a stick-shift I can tell you that much
and Doug Smith goes 13.25 @ 112"

jgkurz · « **Reply #4 on:** September 12, 2016, 12:23:11 PM »

Quote from: Qikbbstang on September 12, 2016, 12:20:15 PM

The Classic worded as announced:-

" Doug Smith from Agera, Ohio
1961 Mustang Mach 1 with a 427
Is that an FE or like a Windsor stroker under the hood?
Don't Know .
Got a stick-shift I can tell you that much
and Doug Smith goes 13.25 @ 112"

That time seems WAY off. I think Doug planned to run significantly faster. Hope he didn't break.

Qikbbstang · « **Reply #5 on:** September 12, 2016, 12:53:54 PM »

ah what tha...............

"Hemi Joel 1967 GTX Conv built to be a F.A.S.T. car - showed up anyway

13.63 101.... ?

afret · « **Reply #6 on:** September 12, 2016, 12:57:22 PM »

Quote from: jgkurz on September 12, 2016, 12:23:11 PM

Quote from: Qikbbstang on September 12, 2016, 12:20:15 PM
The Classic worded as announced:-

" Doug Smith from Agera, Ohio
1961 Mustang Mach 1 with a 427
Is that an FE or like a Windsor stroker under the hood?
Don't Know .
Got a stick-shift I can tell you that much
and Doug Smith goes 13.25 @ 112"

That time seems WAY off. I think Doug planned to run significantly faster. Hope he didn't break.

If he could get the car to hook and have a good run, at that MPH he should be able to run in the 11's.

thatdarncat · « **Reply #7 on:** September 12, 2016, 01:19:12 PM »

Jay is planning on making a second run during the "all run" session starting soon.

jgkurz · « **Reply #8 on:** September 12, 2016, 01:21:00 PM »

Quote from: thatdarncat on September 12, 2016, 01:19:12 PM

Jay is planning on making a second run during the "all run" session starting soon.

So no second run for you Kevin?

TomP · « **Reply #9 on:** September 12, 2016, 01:45:42 PM »

That is some great potential for the Millers. Be interesting to see what it will do.

thatdarncat · « **Reply #10 on:** September 12, 2016, 02:35:17 PM »

Quote from: jgkurz on September 12, 2016, 01:21:00 PM

Quote from: thatdarncat on September 12, 2016, 01:19:12 PM
Jay is planning on making a second run during the "all run" session starting soon.

So no second run for you Kevin?

Nope, car is packed, just waiting to see Jay run again.

TomP · « **Reply #11 on:** September 12, 2016, 02:49:13 PM »

How many cars left to run? Two crashes in quick succession 15 minutes from the cutoff must change the cutoff.

TomP · « **Reply #12 on:** September 12, 2016, 03:01:32 PM »

Here he comes.... 8.96

Lenz · « **Reply #13 on:** September 12, 2016, 03:02:40 PM »

8.96 for Jay, consistency is the name of the game

thatdarncat · « **Reply #14 on:** September 12, 2016, 03:10:59 PM »

Quote from: Lenz on September 12, 2016, 03:02:40 PM

8.96 for Jay, consistency is the name of the game

Although mechanically that might be a good sign, he wanted to go quicker

JAKES66 · « **Reply #15 on:** September 12, 2016, 04:07:28 PM »

8.949 sec @ 150 MPH!!!

machoneman · « **Reply #16 on:** September 12, 2016, 06:42:00 PM »

Yeah! Go Jay go!

cjshaker · « **Reply #17 on:** September 12, 2016, 10:38:05 PM »

Car finally hooked good this time, but nobody told me you needed to let off the line lock when you hit the go pedal. Finally realized what I did about 30' off the line. Stupid rookie mistake. Didn't miss any gears, so that was good, but my speed didn't improve any with the 4.30 gears. Might help if I wasn't dragging the front tires..lol

Way off what I was hoping to run, but hopefully I can get better each day. The starter Bendix is going out, so may be changing that tomorrow. Just happy to make it to Norwalk at this point. The route was a convoluted mess, but the car and trailer handled it great. Managed to find a place to change my front tire after I left National Trail, and they were great about getting it done pronto for me. All in all, a satisfactory day. Now if I can just remember, this isn't Beaver Springs, so forget about the line lock on the line.

jgkurz · « **Reply #18 on:** September 12, 2016, 11:06:33 PM »

Thanks for the update Doug. We are all rooting for you. Day 1 jitters are done so I have no doubt you will make big improvements on Day 2. You got this!

jgkurz · « **Reply #19 on:** September 13, 2016, 08:32:41 AM »

For those of you on Facebook, Roadkill just posted a nice interview with Scott Miller and his 502ci Cougar. That engine looks like a beast. Can't wait to see how he run's today.

cobracammer · « **Reply #20 on:** September 13, 2016, 09:15:25 AM »

Jay just ran! I love how a naturally aspirated "9" sounds like a disappointment to the announcers LOL 3:55 on the youtube MT channel if anyone wants to reference. :0)

CaptCobrajet · « **Reply #21 on:** September 13, 2016, 10:41:28 AM »

Scott went 9.13 @ 144. Only moved the chip 200 today. More to come..... it still needs to make the trip. They are having fun, and that is the main goal. Hoping for safe and trouble-free cruising for Scott, Jay, Doug, and the whole FE contingent.

Qikbbstang · « **Reply #22 on:** September 13, 2016, 11:23:09 AM »

Doug, Re: "The starter Bendix is going out, so may be changing that tomorrow."

Alway's felt the great bonus of a stick was an ability of push-starting it.... Heck, is push-starting LEGAL at Drag Week? Gathering a few by-stander's for a push start? ?

Qikbbstang · « **Reply #23 on:** September 13, 2016, 11:49:59 AM »

Sitting in the peanut gallery and figured I'd search how Jay was doing on the books. Did a copy paste that did not like it. Looks like a pesky Nova is going to get Jay on his toes/Day 1 :

380
E
Modified - PA
Ev
Bernard
Yes
1990 Ford Mustang Black
9.819--118.56
144
F
Modified - NA
Brad Dyer
1972 Chevrolet Nova
Green
8.901--153.51
4
F
Modified - NA
Jay Brown
1969 Ford Mustang Blue
8.949--150.58
111
F
Modified - NA
Matt Bryson
1980 Ford Mustang Blue
9.243--146.02
121
F
Modified - NA
Scott Scribner
1967 Chevrolet Camaro Red
9.803--137.90
94
F
Modified - NA
Matthew Letteer
1967 Pontiac Firebird Maroon
9.905--139.63
5
F
Modified - NA
Joshua Norris
1967
Chevrolet Chevy 2 Nova Blue/Red
10.097--131.55
278
F
Modified - NA
Jeff Jackson
1984 Ford Mustang Yellow
10.566--133.67
367
F
Modified - NA
Don Smith
1952 Chevrolet Belair Black
11.096--121.58

KMcCullah · « **Reply #24 on:** September 14, 2016, 09:47:17 AM »

Just saw Doug run a 12.98@112. Yes..... the front tires were spinning this time.

jgkurz · « **Reply #25 on:** September 14, 2016, 10:28:41 AM »

Roadkill on Facebook just posted a video of Jay changing a cam in his SOHC. In the video, Jay confirmed he had rocker issues that took out a cam.

https://www.facebook.com/RoadkillShow/

Lenz · « **Reply #26 on:** September 14, 2016, 11:38:52 AM »

Kudos to Jay for working his way through that interview, got a lot on his mind I'm sure-

WConley · « **Reply #27 on:** September 14, 2016, 12:06:31 PM »

Yeah I could see that it was trying his patience! Very gracious of Jay to hang in as long as he did.

Hopefully with a full compliment of working rocker arms he'll pick up a tenth or two...

- Bill

cobracammer · « **Reply #28 on:** September 14, 2016, 12:31:42 PM »

Jay Brown.... 9.10 at 149 MPH

Qikbbstang · « **Reply #29 on:** September 14, 2016, 12:43:47 PM »

David Freiburger mentioned something about an FE crowd Lynch-Mob showing up in front of Jay's house and encouraging him along

The good side of Jay's Rocker/Cam issue is he runs a dry sump so debris and oil must make it clear to the reservoir before it gets pumped back through the motor.... The scavenging pump sections well that's why they use suction strainers.... hopefully needle rollers being steel all found their way to magnets...

One thing after Jay swapped out literally hundreds of FE intakes for writing his book, maybe changing a cam and a few rockers doing a run and then changing another questionable rocker before hitting the road on his SOHC in the pits at Drag Week is not as brutal as it appears.

Brian stated Jay's car has an early Pro/Stock style hood scoop --- so much for the SHELBY on steroids look.

I recall in the industrial oiling product mfgs catalogs a return strainer with electric sensing capability that indicated metal debris in the return oil piping lines. They were for big money applications like turbines, compressors, hydraulic systems and paper making machines - for maintenance guys that don't want big surprises. Never sold one or even got to see one up close. I'm thinking it worked like a bug-zapper with the metal debris creating the contact/alarm. Would it help to know within seconds when engine components particularly roller rockers start shedding metal?.............

cobracammer · « **Reply #30 on:** September 14, 2016, 12:44:33 PM »

OOOOOOO- I've always wanted to be part of a MOB!

turbohunter · « **Reply #31 on:** September 14, 2016, 01:40:38 PM »

All I saw was a 9.10 @ 146 on a questionable rocker.
From what he said in an interview he changed a couple and left one in to be changed later.

cobracammer · « **Reply #32 on:** September 14, 2016, 02:06:50 PM »

Seriously! That's Moxy..... LOL "I wanted to leave one bad rocker in there just to be a lesson to the others......... Just try me! "

mbrunson427 · « **Reply #33 on:** September 14, 2016, 02:28:36 PM »

Jay got a nice interview spot on the live feed. Someone oiled down the track so they put on some "added footage". I've been sitting at work today with the live feed in my headphones. I haven't been able to catch Scott Millers Cougar or Doug's Mustang yet.

The very last pass of the day was a memorial pass for a racer who had been killed. His friends were racing his car and they packed the chutes with his ashes. It was a very cool tribute.

cobracammer · « **Reply #34 on:** September 14, 2016, 03:11:22 PM »

Scott Millers Cougar was earlier in the day...... Nice hook up. Front wheels up off the staring line and a solid pull. Unsure what his #'s were though

TomP · « **Reply #35 on:** September 14, 2016, 03:18:11 PM »

Anyone know what Scott's numbers were? I didn't see him run. Saw Jay and Joel and how about that run just before the memorial one where Lutz went 6.10 on his only pass with no chance to rerun.

turbohunter · « **Reply #36 on:** September 14, 2016, 04:19:24 PM »

9.13@143

Qikbbstang · « **Reply #37 on:** September 14, 2016, 04:39:49 PM »

Come on guys wake up: Jay left a questionable rocker on the opposite bank from where he changed the cam to work on (after the run of the day).
I don't have a clue how involved it is to change one rocker on a SOHC

Re: "All I saw was a 9.10 @ 146 on a questionable rocker.
From what he said in an interview he changed a couple and left one in to be changed later"

turbohunter · « **Reply #38 on:** September 14, 2016, 04:48:22 PM »

I have no idea what you are talking about bb.
I've been awake since 5a

mbrunson427 · « **Reply #39 on:** September 14, 2016, 05:47:44 PM »

I found Scott Miller's pass! 2:04.20 on the video. Awesome run!!

https://www.youtube.com/watch?v=nFad-_rqYRo

jgkurz · « **Reply #40 on:** September 14, 2016, 07:26:22 PM »

Hot Rod documented Jay's whole rocker debacle. I'm not sure I'd want the fanfare.

http://www.hotrod.com/articles/jay-brown-swaps-cams-soch-ford-keep-competition-drag-week-2016/

TimeWarpF100 · « **Reply #41 on:** September 14, 2016, 09:57:10 PM »

https://youtu.be/nFad-_rqYRo?t=5h54m

Jay's 9.10 @ 149.40

Jay interview 5:54:00

https://youtu.be/nFad-_rqYRo?t=5h25m21s

TomP · « **Reply #42 on:** September 15, 2016, 03:11:20 AM »

Scotts Cougar is very consistent and awesome to watch.

machoneman · « **Reply #43 on:** September 15, 2016, 08:33:52 AM »

Quote from: jgkurz on September 14, 2016, 07:26:22 PM

Hot Rod documented Jay's whole rocker debacle. I'm not sure I'd want the fanfare.

http://www.hotrod.com/articles/jay-brown-swaps-cams-soch-ford-keep-competition-drag-week-2016/

What's cool about those pics is that I have old pics of Dyno Don and Jon Kaase leaning almost identically over the fenders of his world-beating Pro Stock SOHC Maverick at the long closed US 30 drag strip in NW Indiana!

Jay is Dyno Don Nicholson incarnate I swear!

Falcon67 · « **Reply #44 on:** September 15, 2016, 09:06:25 AM »

This year, we have two people from here in the mix. Don Smith in a black Belair, running mid 10's and Tom Ciancitto in a 37 F1, running in the mid 9s. Tom's been testing at the track here for a couple of weeks.

Royce · « **Reply #45 on:** September 15, 2016, 10:12:49 AM »

Jay just ran a 9.12 at 149.. Still a ton of black smoke on launch

cobracammer · « **Reply #46 on:** September 15, 2016, 10:20:02 AM »

Hmmmm. That black smoke looks awfully familiar....Could that be a "dump" of fuel at throttle? Running rich?

CaptCobrajet · « **Reply #47 on:** September 15, 2016, 10:38:32 AM »

Scott went 9.15 today........Indy is a little slower track than the others on the trip....

troublemaker427 · « **Reply #48 on:** September 15, 2016, 12:08:59 PM »

Right around 1,700' DA.

Falcon67 · « **Reply #49 on:** September 15, 2016, 12:16:41 PM »

Quote from: troublemaker427 on September 15, 2016, 12:08:59 PM

Right around 1,700' DA.

That's great air IMHO.

thatdarncat · « **Reply #50 on:** September 15, 2016, 12:22:50 PM »

Quote from: troublemaker427 on September 15, 2016, 12:08:59 PM

Right around 1,700' DA.

I'm here Jody, I don't think that's right. What readings are you using ?

troublemaker427 · « **Reply #51 on:** September 15, 2016, 05:45:48 PM »

http://airdensityonline.com/tracks/

ec164 · « **Reply #52 on:** September 15, 2016, 08:42:45 PM »

great job so far Jay, Good Luck here on out, awesome car.........Al

thatdarncat · « **Reply #53 on:** September 15, 2016, 09:33:52 PM »

Quote from: troublemaker427 on September 15, 2016, 05:45:48 PM

http://airdensityonline.com/tracks/

Using that website's density calculator and the weather readings I had today I get around 2600'

troublemaker427 · « **Reply #54 on:** September 16, 2016, 06:10:56 AM »

It was 1700' when I looked earlier in the day. I have no idea except for what I saw. Maybe it was wrong?

thatdarncat · « **Reply #55 on:** September 16, 2016, 07:30:03 AM »

Quote from: troublemaker427 on September 16, 2016, 06:10:56 AM

It was 1700' when I looked earlier in the day. I have no idea except for what I saw. Maybe it was wrong?

Yeah, not trying to shoot the messenger Jody. I'm guessing looking at it the calculator was behind on the temperature it was using at the time. Thanks for following along. Jay & Steve made it back to the hotel last night fine. Joel had charging system troubles last night, but far as I know they made it back. The track opens at 11:30am today and we start running at 1:30pm.

Falcon67 · « **Reply #56 on:** September 16, 2016, 09:04:05 AM »

I have that site linked from the front page of the track web site here. BTW, it's cool this AM, clean air and a fantastic 2981 DA. Problem this summer has been that the DA at the airport 10 miles from the track might be 3000 and the track 4500 because it's raining at the airport and not at the track LOL. So it depends on where you get the reading because airdensityonline gets it's data from the closest reporting NWS weather station, NOT the track it's self.

This is what great 3500 DA does to my bitty 300HP 302 car:

News:

Author Topic: Drag Week 2016 - Random Viewer Updates (Read 24219 times)

afret

TomP

TomP

TomP

TomP

TomP