TnD street/sportsman rocker shaft dia

[fekbmax]

I have ask this a few times with no response. I know that atleast a few of you guys must have or use the TnD street rocker setup. I'm just wanting to know the dia of the shaft.
Anyone ?

[XR7]

I don't have a set and have never measured them, but... I asked the same question when they first came out, and if I remember correctly... the "street T&D"  are .750 diameter shafts, the T&D Race sets I own and have run, they are .625. Jesel are .562 and the stock FORD I think... are .840 (that might not be correct).

[Posi67]

And just for comparison... the Ersons are .682 so if as I suspect you were hoping to find a replacement shaft, we're both out of luck unless someone has spares for sale. 

[Nightmist66]

Yes, T&D street is .750"

Erson have an 11/16" shaft or .6875".

Harland Sharp standard bushed are .840"

Harland Sharp needle bearing are .875"

Harland Sharp "new" style bushed are .750"

[fekbmax]

Thanks guys, wondering which .750 shafts are more readaly available. The Harland sharp or the TnD.

[Nightmist66]

FWIW, the T&D 3/4" shaft is hollow like the Erson for standard oiling, whereas the Harland Sharp 3/4" is solid.

[fekbmax]

Thanks.