is a sport. Death or serious injury can result.
![Roll Eyes ::)](http://fepower.net/simplemachinesforum/Smileys/default/rolleyes.gif)
![](http://i135.photobucket.com/albums/q128/ScotiaFE/Valve%20Covers/DSCN1249_zpsvouataww.jpg)
The new shocks.
![Shocked :o](http://fepower.net/simplemachinesforum/Smileys/default/shocked.gif)
I normally advocate the best shocks you can afford. These are the best I can afford.
There are even better ones than these, but they are out of my league.
![](http://i135.photobucket.com/albums/q128/ScotiaFE/Valve%20Covers/DSCN1248_zpsowsmxc0v.jpg)
Here are a couple of things I do to springs. The locator on the spring and perch and clamp plate do not always
fit snug. I sleeve the bolt and nut to have a slight press and this holds the spring nice and square.
I have sheared a spring pin and the result was not good.
![](http://i135.photobucket.com/albums/q128/ScotiaFE/Valve%20Covers/DSCN1246_zpsk8joipqz.jpg)
I painted the top of the pin before I took the picture, but you can just see the thin wall sleeve.
![](http://i135.photobucket.com/albums/q128/ScotiaFE/Valve%20Covers/DSCN1247%20-%20Copy_zpsgwo9cg4v.jpg)