Fel-Pro 90145 intake gasket

[rcodecj]

Is the Fel-Pro QMS90145 intake gasket ok for PI intake and Edelbrock heads?

Here's a link:
http://www.summitracing.com/parts/FEL-MS90145/

[ScotiaFE]

Yes it can be used.
I kinda like them. They are a good long haul gasket.
Can't really say how they line up on a PI, but should be ok.
I never use end seals on the intake to bulkhead ends. Only silicone on the ends and a smear around the water ports.
Make sure you snug the intake down good after the first heat cycle.

[rcodecj]

If I recall correctly, the PI intake matches the top and is shorter on the bottom. The sides I don't remember.