Same - depends on what you want. If you're running a tunnel ram, just cut the hood to clear the ram and use a "gasser" scoop like what I use.
Teardrop - single 4 bbl, 16" hole under scoop for cold air induction. Scoop is from Crites, hood is US Body Source (bought in 1992). I didn't think they still made any Falcon parts. Better call.
With a Tunnel Ram on a 351C
No spacers
Carbs sideways with 1/2" spacer to allow for linkage.
With Hood
No spacers, 1:1
351C, Funnelweb 4V, 2" spacer, single 4 bbl