Dedicated to Building and Racing the Ford FE Engine
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
SMF - Just Installed!
Home
Help
Search
Login
Register
FE Power Forums
»
FE Power Forums
»
FE Technical Forum
»
Lifters when using FE 3/8" ball end push rod
« previous
next »
Print
Pages: [
1
]
Author
Topic: Lifters when using FE 3/8" ball end push rod (Read 639 times)
0 Members and 1 Guest are viewing this topic.
1968galaxie
Sr. Member
Posts: 311
Lifters when using FE 3/8" ball end push rod
«
on:
January 16, 2022, 11:39:56 AM »
For solid lifter or hydraulic roller FE engines.
I see that many lifters are dual use - BBF and FE or sometimes SBF and FE.
However the FE push rod lifter side is 3/8" ball.
Does one require FE push rods with the 5/16" ball end to use these lifters?
Logged
Mr Woodys Garage
Jr. Member
Posts: 45
Re: Lifters when using FE 3/8" ball end push rod
«
Reply #1 on:
January 16, 2022, 04:10:36 PM »
Yes, But They Are Available From The Well Known Suppliers. I Had The Same Situation On My 428/Solid roller Cam With Morel Pressure Oiled Lifters And Harlan Sharp Rockers.
Logged
Print
Pages: [
1
]
« previous
next »
FE Power Forums
»
FE Power Forums
»
FE Technical Forum
»
Lifters when using FE 3/8" ball end push rod