Author Topic: Comment on how you think my engine is running- vacuum seems low (youtube mpg)  (Read 1342 times)

0 Members and 1 Guest are viewing this topic.

FElove

  • Newbie
  • *
  • Posts: 1
    • View Profile
My idle seems to fluctuate a little and vac seems low.  What do you think?


<iframe width="854" height="480" src="https://www.youtube.com/embed/QUH72dmouRY" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

<iframe width="560" height="315" src="https://www.youtube.com/embed/Hzy6Bsd9_wo" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
« Last Edit: November 28, 2019, 05:13:30 PM by FElove »

Stangman

  • Hero Member
  • *****
  • Posts: 1836
    • View Profile
Sounds like you need a little tuning.  Maybe set the timing at 14-16 and then see we’re you idle is. It sounds like it’s searching. Adjust the idle mixture screws evenly and your idle will probably go up even more. Set it to were you want it let’s say 900 in general. Then after you have everything approximate then if it’s not good you could look for a leak but it seems like the vacuum is going down while the idle goes low. Start from there

Yellow Truck

  • Hero Member
  • *****
  • Posts: 608
    • View Profile
I think you will get a better response if you provide all the details about your engine, and then ask a more specific question.
1969 F100 4WD (It ain't yellow anymore)
445 with BBM heads, Prison Break stroker kit, hydrualic roller cam, T&D rockers, Street Dominator Intake with QFT SS 830.

Paul.

My427stang

  • Hero Member
  • *****
  • Posts: 4202
    • View Profile
Agreed need more info, but if the engine is warm, sounds to me like

1 - idle too low, idle a/f adjusted incorrectly
2 - timing is set incorrectly, and go back to #1
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch