I have a set of C8AE-H heads that have stainless CJ size valves, 3 angle valve job, Isky dual springs (135seat/350open), spring cups and have been ported by me. I had a couple of ports flowed and they came in at 240 intake and 185 exhaust. They have also been milled to have 58cc chambers. The intake is a Performer RPM that was milled to fit the heads perfectly. The intake has been gasket matched to the heads and painted in DP90 (the black leaded type that will not peel or bubble). I ran these in my Comet that scaled at Brainerd @3850 w/me in the car and ran 12 teens with open exhaust and 12.40-50 with full exhaust. These would be a great set up for a 352-360ci motor or 390 with dished pistons to raise your compression. I am selling these because I am stepping up to a set of heads from Blair Patrick. These parts all worked great when I last ran the engine and would expect them to work well now. I am asking $1000.00 firm for the heads AND intake. I can send photos if interested. I am located in the twin cities. Jim
