« previous next »
Pages: 1 [2]  All

Author Topic: roller cams  (Read 10057 times)

0 Members and 1 Guest are viewing this topic.

blykins

  • Hero Member
  • *****
  • Posts: 5156
    • View Profile
    • Lykins Motorsports
Re: roller cams
« Reply #15 on: January 12, 2014, 06:56:06 AM »
If you plan to approach the 600-625 lb open pressure ballpark, then yes, I would look hard at timeserts or another rocker setup.  I run about 170/400 on hyd rollers and have never had a problem there.
Logged
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

bn69stang

  • Hero Member
  • *****
  • Posts: 541
    • View Profile
Re: roller cams
« Reply #16 on: January 12, 2014, 07:36:44 AM »
Ok thanks Brent , most likely it will be a hyd roller , on the stroker 28.. Bud
Logged
69 mach 1 , 428 C J  Blue Oval Performance BBM heads -T@D rocker s- Blue thunder intake - Comp hydr roller - MSD ignition - FPA headers- Holley 850 hp double pumper - TKO 600 - 9 inch 3.89 Detroit Locker . ride tech coil over conversion - power rack @ pinoin steering - 13 inch drilled @ slotted 4 wheel disc brakes ..

bn69stang

  • Hero Member
  • *****
  • Posts: 541
    • View Profile
Re: roller cams
« Reply #17 on: January 17, 2014, 07:56:28 PM »
Brent give me some specs on hyd roller s you have used on 427 , 428 , or 445 s  , was thinking something in the  234-240 @ 50 and maybe in the 570 s on the lift , on a 110 - 112 lobe for the current 434 i have .. Bud
Logged
69 mach 1 , 428 C J  Blue Oval Performance BBM heads -T@D rocker s- Blue thunder intake - Comp hydr roller - MSD ignition - FPA headers- Holley 850 hp double pumper - TKO 600 - 9 inch 3.89 Detroit Locker . ride tech coil over conversion - power rack @ pinoin steering - 13 inch drilled @ slotted 4 wheel disc brakes ..
Pages: 1 [2]  All
« previous next »