« previous next »
Pages: [1]

Author Topic: Pictures of Cammer in 67-68 mustang  (Read 1531 times)

0 Members and 1 Guest are viewing this topic.

338Raptor

  • Full Member
  • ***
  • Posts: 162
  • Aerodynamics are for men who can’t build engines.
    • View Profile
Pictures of Cammer in 67-68 mustang
« on: April 27, 2020, 12:37:32 AM »
Does anyone have pics of a Cammer in a 67-68 mustang? 
I’m trying to do some pre-planning before my engine is ready to install.
I already have the shock towers deleted an I’m interested in seeing what others have done for brake booster relocation options.  Also, if there are other clearance concerns (ie. headers).
Logged
ERA 427SC Cobra: Iron ‘67 625hp 482” SOHC, TKX 5 speed, TrueTrac 3.31 IRS, Magnesium Halibrands, Avon CR6ZZ tires. 

1969 Shelby GT350, 4 speed.

1967 Mustang Fastback: Close ratio T56 Magnum, Fab-9, Wilwood superlite brakes, Torque arm rear suspension, TCI-IFS with shock tower delete, (Coming soon, FE motor TBD)

1970 F250 4x4 Mud Truck, 557 BBF, as cast P51 heads, 900 hp @6700rpm, 801 tq, Q16, C6.

2012 Cobra Jet Mustang factory drag car, 5.4 liter 4.0 Whipple, 970 RWHP.

1964 Galaxie 500XL, 35 spline 3.70 Strange S-Trac, 6R80, (Coming soon: Pond Aluminum 525 SOHC, 800hp)

jayb

  • Administrator
  • Hero Member
  • *****
  • Posts: 7567
    • View Profile
    • FE Power
Re: Pictures of Cammer in 67-68 mustang
« Reply #1 on: April 27, 2020, 09:23:44 AM »
I set mine up with a Wilwood dual cylinder setup.  The picture below shows the two small reservoirs, one for the front brakes and one for the rear.  They clear the SOHC valve covers just fine.

If you are going to stay with a standard dual reservoir master cylinder, you will need to relocate it.  Most people do that with a kind of bellcrank arrangement, that raises the master cylinder up 6" or so.

Logged
Jay Brown
- 1969 Mach 1, Drag Week 2005 Winner NA/BB, 511" FE (10.60s @ 129); Drag Week 2007 Runner-Up PA/BB, 490" Supercharged FE (9.35 @ 151)
- 1964 Ford Galaxie, Drag Week 2009 Winner Modified NA (9.50s @ 143), 585" SOHC
- 1969 Shelby Clone, Drag Week 2015 Winner Modified NA (Average 8.98 @ 149), 585" SOHC

   

427stang

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: Pictures of Cammer in 67-68 mustang
« Reply #2 on: April 27, 2020, 09:46:42 AM »
I used the master cylinder from a late model Mustang Cobra and fabricated an aluminum wedge to angle the M/C up like the Boss 429 to get clearance.
Logged

gregaba

  • Hero Member
  • *****
  • Posts: 963
    • View Profile
Re: Pictures of Cammer in 67-68 mustang
« Reply #3 on: April 27, 2020, 02:37:09 PM »
jayb
I wish you would quit posting that picture, I start drooling and have to change my shirt everytime I see it.
Greg
Logged
Pages: [1]
« previous next »