« previous next »
Pages: [1]

Author Topic: Finally got the short block assembled and fitted. On to final assembly tomorrow.  (Read 1252 times)

0 Members and 1 Guest are viewing this topic.

67428GT500

  • Hero Member
  • *****
  • Posts: 694
    • View Profile
Finally got the short block assembled and fitted. On to final assembly tomorrow.
« on: July 28, 2019, 02:45:10 AM »
My 428 and new heads. I think I'll make better power and pump gas friendly.
Logged

427LX

  • Sr. Member
  • ****
  • Posts: 280
    • View Profile
Re: Finally got the short block assembled and fitted. On to final assembly tomorrow.
« Reply #1 on: July 28, 2019, 02:55:38 PM »
Is that paint or some kind of coating on the chambers?
Logged

67428GT500

  • Hero Member
  • *****
  • Posts: 694
    • View Profile
Re: Finally got the short block assembled and fitted. On to final assembly tomorrow.
« Reply #2 on: July 28, 2019, 09:01:59 PM »
I had  2.90- 1.75 valves, unshrouding and a bit of clean up in the bowl. I also had the springs changed as the Edelbrock singles  had varied seat and open pressures. I can only assume it is a machinist dye.
I have always seen blue, never red in the past.
                                                                                                                             -Keith
Logged
Pages: [1]
« previous next »