« previous next »
Pages: [1]

Author Topic: Anyone have a roller they elected not to run?  (Read 1543 times)

0 Members and 1 Guest are viewing this topic.

67428GT500

  • Hero Member
  • *****
  • Posts: 694
    • View Profile
Anyone have a roller they elected not to run?
« on: June 09, 2019, 11:28:53 PM »
I am looking at possibly changing to a roller valvetrain.  Does anyone have something they decided not to run that's hydraulic and won't have such a low vacuum that I can't run power brakes? I am looking for something complete. Used is fine providing it's good to go.
« Last Edit: June 10, 2019, 12:54:59 AM by 67428GT500 »
Logged

HarleyJack17

  • Sr. Member
  • ****
  • Posts: 276
    • View Profile
Re: Anyone have a roller they elected not to run?
« Reply #1 on: June 10, 2019, 11:43:47 AM »
Solid Roller or Hydraulic Roller? Engine specs or goal you have in mind.  I have a hydraulic roller with a few dyno runs on it... I am on the fence about letting go.
Logged

67428GT500

  • Hero Member
  • *****
  • Posts: 694
    • View Profile
Re: Anyone have a roller they elected not to run?
« Reply #2 on: June 10, 2019, 06:28:38 PM »
Hello: 428 B&P edelbrock heads 2.19INT 1.75 Exh. 9.9 CR, C7ZX dual quad, roller rockers, heavy duty shafts, billet stands and end stands....
Logged

6667fan

  • Hero Member
  • *****
  • Posts: 729
  • Every Second Counts
    • View Profile
Re: Anyone have a roller they elected not to run?
« Reply #3 on: June 11, 2019, 08:46:39 PM »
Hello,
I have a new small solid roller, ( Crower), and lifters, ( Ersons). Do a search in this forum. Price will be less than what was listed.
JB
Logged
JB


67 Fairlane 500
482 cid 636/619.
Tunnel Wedge, Survival EMC CNC heads, Lykins Custom Hydraulic Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.55@125.74 1.46 60’

6667fan

  • Hero Member
  • *****
  • Posts: 729
  • Every Second Counts
    • View Profile
Re: Anyone have a roller they elected not to run?
« Reply #4 on: June 14, 2019, 02:49:45 PM »
Keith,
Please try me at
413-six95-three one 03 till 9:00 EST
Thanks,
JB
Logged
JB


67 Fairlane 500
482 cid 636/619.
Tunnel Wedge, Survival EMC CNC heads, Lykins Custom Hydraulic Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.55@125.74 1.46 60’

6667fan

  • Hero Member
  • *****
  • Posts: 729
  • Every Second Counts
    • View Profile
Re: Anyone have a roller they elected not to run?
« Reply #5 on: June 15, 2019, 07:19:31 AM »
Sent you a pm.
Logged
JB


67 Fairlane 500
482 cid 636/619.
Tunnel Wedge, Survival EMC CNC heads, Lykins Custom Hydraulic Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.55@125.74 1.46 60’
Pages: [1]
« previous next »