Author Topic: FE reunion Beaver Springs  (Read 1414 times)

0 Members and 1 Guest are viewing this topic.

mustangPhil

  • Newbie
  • *
  • Posts: 14
    • View Profile
FE reunion Beaver Springs
« on: September 15, 2026, 07:06:55 PM »
I made it out to the reunion in Pa. For some reason the car was not running times it should've ended up being clutch problems . But it did run good enough to qualify for the quick 8, lost in second round clutch slipping like crazy, Fun time .

6667fan

  • Hero Member
  • *****
  • Posts: 858
  • Every Second Counts
    • View Profile
Re: FE reunion Beaver Springs
« Reply #1 on: September 17, 2026, 09:59:15 AM »
That’s great you enjoyed yourself Phil.
Any plans to hit the Valley up again this year?
JB


67 Fairlane 500
482 cid 700/617
TFS Tunnel Wedge, BP BBM Heads,  Bullet Custom Solid Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.55@125.74 1.46 60’

mustangPhil

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: FE reunion Beaver Springs
« Reply #2 on: September 17, 2026, 04:35:19 PM »
YES pulled clutch & went thru it. not really sure what happened. But hopefully I got it right. definately if everything good will be at Dover reunion. If you're there stop by

Rory428

  • Hero Member
  • *****
  • Posts: 1152
    • View Profile
Re: FE reunion Beaver Springs
« Reply #3 on: September 18, 2026, 12:09:47 AM »
I also attended the Beaver Springs FERR this year, for the 4th time, albeit only as a spectator this year. Car count seemed a bit lighter than in other years, but still had a great time. I imagine high gas, and especially diesel prices may have been a contributing factor, especially for racers travelling long distances.
1978 Fairmont,FE 427 with 428 crank, 4 speed Jerico best of 9.972@132.54MPH 1.29 60 foot
1985 Mustang HB 331 SB Ford, 4 speed Jerico, best of 10.29@128 MPH 1.40 60 foot.
1974 F350 race car hauler 390 NP435 4 speed
1959 Ford Meteor 2 dr sedan. 428 Cobra Jet, 4 speed Toploader. 12.54@ 108 MPH

6667fan

  • Hero Member
  • *****
  • Posts: 858
  • Every Second Counts
    • View Profile
Re: FE reunion Beaver Springs
« Reply #4 on: September 18, 2026, 04:37:32 PM »
Phil, can you get me your contact info so I might might get in touch easier?
jwysocki@charter.net
or
Four 13- six nine 5- three one zero 3
Thanks.
JB


67 Fairlane 500
482 cid 700/617
TFS Tunnel Wedge, BP BBM Heads,  Bullet Custom Solid Roller, Ram adjustable clutch, Jerico 4-spd, Strange third member with Detroit Locker, 35 spline axles, 4.86
10.55@125.74 1.46 60’

mustangPhil

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: FE reunion Beaver Springs
« Reply #5 on: September 18, 2026, 06:04:00 PM »
 667 fan my # 914 474 0861. You can call if you like. I would like to see your Fairlane