Author Topic: Public Service Announcement for EFI Guys  (Read 249 times)

0 Members and 1 Guest are viewing this topic.

66FAIRLANE

  • Hero Member
  • *****
  • Posts: 609
  • Andy
    • View Profile
Public Service Announcement for EFI Guys
« on: November 15, 2026, 06:30:43 PM »
Years ago I had read that older ignition switches (especially Ford & Chrysler) had dead spots in them between ignition and start that of course result in the EFI computer rebooting. It is so brief it never worries a carby car.  I had noticed some rebooting on my Sniper over the years but it always started alright (thought it could be better) and I put the rebooting down to voltage drop when you hit the starter. The other day I decided to test the dead spot thing. Especially easy with an auto. Just put it in D (neutral safety lockout) and slowly turn the key from ignition to start and watch the Sniper screen. Sure enough there was a dead spot between ignition and start and another at the end of the start position.

So I decided to put in a start button to see if it made a difference. Not wanting anything obvious I used the V8 emblem that is the choke delete filler on Aussie cars. The key still works too. As I said, car always started alright but it definitely starts better now!




galaxiex

  • Sr. Member
  • ****
  • Posts: 280
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #1 on: November 16, 2026, 05:52:39 AM »
Good info, good to know. Thanks!
Is that a custom dash in your Fairlane?
Love to see a pic of the entire dash.

Looks like you have a Gear Vendors OD?
Every 20 minute job is 1 broken bolt away from becoming a 3 day ordeal.

My427stang

  • Hero Member
  • *****
  • Posts: 4406
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #2 on: November 16, 2026, 08:07:52 AM »
Thanks!

---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

66FAIRLANE

  • Hero Member
  • *****
  • Posts: 609
  • Andy
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #3 on: November 16, 2026, 05:16:13 PM »
Not a custom dash, although I did make the white gauge faces. Google XY GT dashboard images. Yeh that's a GV where the clock used to be.

galaxiex

  • Sr. Member
  • ****
  • Posts: 280
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #4 on: November 16, 2026, 07:33:12 PM »
Not a custom dash, although I did make the white gauge faces. Google XY GT dashboard images. Yeh that's a GV where the clock used to be.

Oh, I assumed that was the dash in your 66/67? Fairlane signature picture.

I see the XY GT is a different car.
Every 20 minute job is 1 broken bolt away from becoming a 3 day ordeal.

66FAIRLANE

  • Hero Member
  • *****
  • Posts: 609
  • Andy
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #5 on: Today at 12:57:50 AM »
It is. Mines had an Aussie 'chassis' grafted on the front through the floor and A pillars. The Falcons and Fairlanes of 67 through 71 here used basically the same unibody as the US cars and dashboards are interchangeable between 67 & 68 (XR, XT, ZA, ZB) and 69 to 71 (XW, XY, ZC, ZD). Mine has the XY GT dash.

My 67 vert on the otherhand has a ZB Fairlane dash. Another one for you to google.  ;D
« Last Edit: Today at 01:06:00 AM by 66FAIRLANE »

gregb

  • Jr. Member
  • **
  • Posts: 93
    • View Profile
Re: Public Service Announcement for EFI Guys
« Reply #6 on: Today at 09:44:30 AM »
Good to know…was wondering why I get a reboot occasionally. Even though I checked the switch, I’ll have to check again.