With only 3.54 gears, I am surprised that you would ever use the Gear Vendors OD while towing. Personally, I strongly favor a manual transmission, for 26 years, I hauled my drag car on my 1974 F350 DRW ramp truck/car hauler, which typically weighed around 10,500 pounds loaded. My truck had a basically stock low compression 390 from a 1976 F250, other than a generic "RV" cam, a pair of Hedman headers, and an iron "S" code intake with a vacuum secondary Holley. It had a NP 435 truck 4 speed, which I believe has similar gearing to a T18, and in those 26 years, the NP435 never had any issues. It also had a Dana 70 rearend with 4.10 gears, and 32" tall tires (7.50R16 Michelins). At 60 MPH, it revved 2600 RPM, and the 390 seemed quite happy there, and rarely needed a downshift on all but the steepest grades. On a 1000+ mile trip from Vancouver BC to California, it was able to climb the long steady Siskyou Summit in Southern Oregon/Northern California in 4th gear. For the past 13 years, I have been towing my 24 foot enclosed trailer, which usually weighs between 9000 and 10,000 pounds, with my 1999 F350 Dually, with a V10 and 5 speed manual, with 3.73 gears. The majority of my towing is in 4th gear, which puts the RPM about where the 74 truck was, 2600 RPM at 60 MPH. If I use 5th gear, the revs drop down lower than I like, just below 2000 RPM. That would be fine with the truck empty, but with 5 tons behind, any hill at all wants a downshift.