Performance Summary:
Cubic Inches: 465 Dyno brand: Stuska
Power Adder: Nope Where dynoed: Dale Meers Racing Engines
Peak Horsepower: 575 @ 6000
Peak Torque: 545 lb-ft
Engine Specifications:
Block brand, material, finished bore size, other notes: Factory Ford 427 S/O, hydraulic block
Crankshaft brand, cast or forged, stroke, journal size: Scat 9000 series 4.125" stroke
Connecting Rods brand, material, center to center distance, end sizes, bolts: Scat I-beam, 6.700
Piston brand, material (caster, hypereutectic or forged), dish/dome volume, static CR: Custom Racetec, dish, 9.8:1
Main Bearings, Rod Bearings, Cam Bearings brand and size: Federal Mogul 125M, Clevite CB743
Piston rings brand, size, other notes: Total Seal, 1.5/1.5/3mm
Oil Pump, pickup, and drive: Melling M57B
Oil pan, windage tray, oil filter adapter: Canton deep front sump, factory style oil filter adapter
Camshaft brand, type (hyd/solid, flat tappet or roller), lift and duration (adv and @.050"): Custom Lykins Motorsports hydraulic roller
Lifters brand, type: Morel
Timing chain and timing cover: Factory timing cover, Cloyes billet
Cylinder heads brand, material, port and chamber information: Factory Tunnel Port, no port work
Cylinder head flow in cfm at inches of lift (28" H2O pressure drop):
Intake Exhaust
.100 .100
.200 .200
.300 .300
.400 .400
.500 .500
.600 .600
.700 .700
.800 .800
Flow bench used, location:
Intake valve brand, head size, stem size: SI stainless, 11/32", 2.250"
Exhaust valve brand, head size, stem size: SI stainless, 11/32", 1.750"
Valve springs brand, part number, specs:
Retainers and locks brand, part number, specs:
Rocker arm brand, type (adjustable or non-adj), material, ratio: T&D street, TP, 1.75
Rocker shafts and stands, brand, material:
Pushrods brand, type, length: Trend, 5/16", .105"
Valve covers, brand, type: Blue Thunder/Holman Moody
Distributor brand, advance curve information: Factory FE, Pertronix, locked out
Harmonic balancer brand: Powerbond
Water pump brand, type (mechanical or electric): Factory style replacement
Intake manifold brand, material, porting information: Factory TP, 2x4 single plane
Carburetor(s) brand, type: Holley 710's, Drew Pojedinec
Exhaust manifolds or headers brand, type: Dyno headers
