Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - DEANs427

Pages: 1 2 [3] 4 5 ... 10
31
Private Classifieds / Wanted: comp/dove fe roller rocker arms
« on: September 01, 2019, 04:29:50 PM »
Anybody got any extra/ spare comp rockers, the blue ones that are no longer available. need 1 each of left & right off set, narrow type
would consider a whole assembly for one side if available
also need extra adjuster screws for same.
Trying to get through season before buying new complete rocker set as part of winter refresh...
612 245 9305
dmdb1969@gmail.com
Dean Markuson

32
FE Technical Forum / Re: Holley 3 Barrels - Opinions wanted
« on: August 19, 2019, 02:16:24 PM »
The supercharge prepped 3 brl got me over the 500 hp hump on my y block build, something the 3310-1 could not do, even prepped the same...
I wanted to try it because it is legal in nostalgia, dominators are not..

33
Private Classifieds / SBF valves SOLD
« on: April 26, 2019, 08:06:53 AM »
Ferrea valves, new in box, 1.94 intake, 1.60 exhaust, 11/32 stem, 45* w/30*backcut
bought to install in Y-block heads but could not use with beehive springs.
paid $200 sell for $90, my loss your gain
dmdb1969@gmail.com
612 245 930five

34
Private Classifieds / Re: CRANK SCRAPER-4.25 STROKER
« on: April 18, 2019, 03:26:45 PM »
E mail sent

35
Private Classifieds / CRANK SCRAPER-4.25 STROKER
« on: April 17, 2019, 08:41:39 PM »
FITS SCAT 4.25 CRANK W/SCAT 6.7 RODS
$25.00

36
FE Engine Dyno Results / Re: FE-older brother Y
« on: April 15, 2019, 03:50:28 PM »
Heo,
on Facebook, search YBloke or Lindsay Shoemark, (no space between Y and Bloke)
I heard he is working on a installation kit with all the parts needed for the conversion..
my parts got to the states in a week but took over 2 weeks to clear US customs,
excellent casting and machine work.
if you order, be sure to order his crank pulley and adaptor if you opt for the big belt..

37
FE Engine Dyno Results / Re: FE-older brother Y
« on: April 15, 2019, 01:55:06 PM »
As for comparing dyno numbers, Jay probably has a couple of my 427 numbers in his archives.
Don't forget to compare these numbers, thick FE 427 block $4000+, thick Y block $100, FE forged steel crank $1000, forged steel $ sign Y crank $200

This does appear to be a call-out, when I first started the Nostalgia, heads-up racing with the gasser I got called out quite often, usually by shiny chebbies, after the first couple of seasons there were not very many call-outs any more...

Joe, bring your Y out for sure !

38
FE Engine Dyno Results / Re: FE-older brother Y
« on: April 15, 2019, 09:48:21 AM »
"Its not the size of the dog (motor) in the fight, its the size of the fight in the dog", applies here

39
FE Engine Dyno Results / Re: FE-older brother Y
« on: April 11, 2019, 05:11:19 PM »
Y block sonic test results:

40
FE Engine Dyno Results / FE-older brother Y
« on: April 09, 2019, 10:32:05 PM »
299 cubic inch
4-71 supercharger
503 hp@ 6100 rpm
450 ft/lbs@ 5000
SuperFlow WinDyn v3.2 dyno
R&R performance, Spring lake park MN

Factory ECK 292 BLOCK, .050 over, cast in 1955
Factory forged 292 hd truck crank, .020 main, .040 rods, stock stroke 3.3
Mummert forged connecting rods & push rods
Diamond blower pistons w/total seal 1.5, 1.5, 3.0 blower ring pack,
Clevite rod & main bearings, Ted Eaton special cam brg.
main bearing girdle/ scraper fabricated per Ted eaton blueprints
factory oil pump, pick-up, & truck pan
Cam& lifters by Oregon cam grinding to Ken Heard specs
Mummert aluminum cylinder heads modified to fit beehive springs & oversize ex.valves
 Harlan/sharpe 1.6 ratio roller rockers
FPP double roller timing chain
Rotating assy. balanced by Ten Eaton specialties
Factory Y block distributor converted to dura spark, curved by Faron Rhodes
Blower& drive assembly by Deans Blowers out of Washington state, old school blower
Intake manifold & crank adaptor from Y-bloke enterprizes in walla walla Australia
950 holley 3rl

41
FE Technical Forum / Re: HOLLEY QUESTION
« on: March 21, 2019, 12:23:00 PM »
I see the holes as a possible path of hot dirty underhood air to my blower, I plan on taping them off.
Using this carb at strip only, running 3310 for street and cruise

42
FE Technical Forum / HOLLEY QUESTION
« on: March 19, 2019, 12:03:23 PM »
LIST 3916-1S, setting this carb up for use on top of a 4-71 supercharger, noticed main body has 1/16+ drilled passage to OUTSIDE in each venturi about 1/2 inch up from base plate !? original owner of carb said it came that way, looks factory, plan on plugging them...
opinions, comments, suggestions....

43
Private Classifieds / Re: WANTED: 1 COMP/DOVE ROLLER ROCKER ARM for FE
« on: January 24, 2019, 04:23:08 PM »
I don't think they are the same, mine do not have bushings. Thank you

44
Private Classifieds / FOUND,THANKS JAY: 1 COMP/DOVE ROLLER ROCKER ARM for FE
« on: January 23, 2019, 11:40:30 AM »
I need 1 off-set right comp/dove roller rocker arm, standard width. can trade 1 centered arm or buy out right. these are the blue colored ones that are no longer available new.
Dean
 dmdb1969@gmail.com
612 245 930five

45
Private Classifieds / WTB Hot rod tires
« on: October 12, 2018, 03:35:46 PM »
Looking for a pair of 30 x 15.50 x 15 for the rear of my hot rod bronco
need to be DOT legal
will consider anything close, need 12-13 inch wide tread, 29-31 tall
in or close to MN
612 two 45 9305
dmdb1969@gmail.com

Pages: 1 2 [3] 4 5 ... 10