Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - HR427

Pages: 1 ... 5 6 [7]
91
FE Technical Forum / Re: Can it make 600fwhp.....High Riser 427
« on: September 27, 2019, 07:27:22 AM »
no, I have a set of HS for it.

Why do the heads need to be cut?  By all means, educate me.


92
FE Technical Forum / Re: Can it make 600fwhp.....High Riser 427
« on: September 27, 2019, 06:08:37 AM »
https://www.lunatipower.com/drag-race-solid-roller-cam-ford-352-428-302-310-1.html

What do you fellas think about this offering from lunati for a shelf grind?

93
Private Classifieds / Re: NOS 66-69 Fairlane/Torino (Mustang?) Jardine? Kustom? Belanger? 2" Headers 428CJ
« on: September 12, 2019, 07:39:33 AM »
I have a set for a Galaxie, same arrangement.  And they have a belanger tag on them

94
Drag Strip Results for FE Powered Vehicles / Re: 67 Mustang 390
« on: September 09, 2019, 05:49:19 AM »
How about loosening up the clutch to stop the tire spin

95
FE Technical Forum / Re: Aluminum flywheel
« on: September 08, 2019, 06:26:51 PM »
Probably geared towards an adjustable clutch

96
FE Technical Forum / Re: Can it make 600fwhp.....High Riser 427
« on: September 07, 2019, 03:56:31 PM »
Speaking of older cams, I do have a L1P1 new in the box.

97
FE Technical Forum / Re: Can it make 600fwhp.....High Riser 427
« on: September 06, 2019, 01:04:17 PM »
solid lifter marine

98
FE Technical Forum / Re: Can it make 600fwhp.....High Riser 427
« on: September 06, 2019, 11:17:26 AM »
I would actually love to use a solid flat tappet. 

This will have a faceplated TL in a 64 galaxie that weighs roughly 3750

Thanks for the help fellas.  I may contact some of you for parts. 

99
FE Technical Forum / Re: Can it make 600fwhp.....High Riser 427
« on: September 06, 2019, 09:22:42 AM »
you really think so?

100
FE Technical Forum / Can it make 600fwhp.....High Riser 427
« on: September 06, 2019, 07:05:56 AM »
Im am planning on putting together a stock stroke 427.  Was looking for input to see if im dreaming or what.

427 4.250 bore
$ crank, molnar rods, dome diamonds 13/14-1, low tension ring set
unported F HR heads 2.19/1.72
Unported D manifold
Solid roller
CU/CV carbs

Can these basic componets get me close to 600 fwhp?  Thanks



Pages: 1 ... 5 6 [7]