Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - centredautomag

Pages: 1 [2] 3
16
Member Projects / Re: new engine
« on: March 05, 2019, 05:51:02 PM »
If I can get them to fit like they should I'll make them available.
 
Thanks.

17
Member Projects / Re: NEW ENGINE VIDEO 2
« on: March 05, 2019, 11:41:54 AM »
thank you Brent.

18
Member Projects / Re: NEW ENGINE VIDEO 2
« on: March 03, 2019, 09:06:08 PM »
Waiting for a new one

19
Member Projects / Re: new engine
« on: March 03, 2019, 07:51:47 PM »
I am working on those when I have some time.They era cast Alu.baldy's that are close to 1/2 inch higher than original ones ,but they don't fit the way I want so need to modify tooling and try another set,I'll make a new post with photo as soon as we get a set to fit ok.

   Thanks Marc.

20
Member Projects / Re: new engine
« on: March 03, 2019, 08:35:48 AM »
I just put the carbs from my tunnel ram cleveland on and din't touch them. Engine going great.
Had a chance to try a set of cast Alu. Baldy valves covers that I am working on,look good and fit
all right but still need work.

21
Member Projects / NEW ENGINE VIDEO 2
« on: March 02, 2019, 05:01:05 PM »
here is the second video with close ups , https://youtu.be/3bXvaL4pZHA

22
Member Projects / new engine
« on: March 02, 2019, 03:57:37 PM »
we started the engine this morning , all is good here is the you tube link , https://youtu.be/MuUW2g17E1o

23
Member Projects / Re: Carburetor madness by Drew
« on: February 28, 2019, 06:14:24 PM »
You are welcome Drew can't wait to get them . I'm starting the engine with the old ones Saturday morning. I'll gey a few picture and maybe a short video if I can,not to good with those things.

Marc.

24
Member Projects / Re: Carburetor madness by Drew
« on: January 17, 2019, 02:26:29 PM »
Hi Drew sent you a message for a pair of 600s  . Thanks Marc

25
FE Technical Forum / Re: rocker stand shims
« on: January 16, 2019, 12:55:49 PM »
Very nice job. Time to get the tools out and play. thanks Marc

26
FE Technical Forum / rocker stand shims
« on: January 15, 2019, 09:40:55 AM »
I need to shim my rocker stand .240 is there some shim kit avaliable
 Thanks Marc.

27
FE Technical Forum / Re: FE Race and Reunion who is going !!
« on: January 03, 2019, 12:17:10 PM »
We will be there again this year to good to miss. 87 days and counting.

28
FE Technical Forum / Re: Quench
« on: December 28, 2018, 09:10:26 AM »
The way it is now comp. would be 9.64 with the calculator I have.
Brent ad a cam made for me here are the spec.

lift               .579 in      .586 ex
 dur.@ .006  299           311
timming@.050  open int 18 btdc  close46abdc
                               ex  61bbdc          9atdc
icl  104
duration @.50   in 243    ex249
lobe separation  110.0
the heads are cnc ported Pond and come from Brent. thanks Marc.

29
FE Technical Forum / Quench
« on: December 28, 2018, 12:27:43 AM »
Install piston tonight, they are .011 down and I have 1020gasket ,they hare.041 thick so .051 of
Quench . Is it ok ,or should order gasket that are thinner to get closer to .40.
Thanks for all the info. You gave me so far. Marc.

30
FE Technical Forum / Re: cylinder bore
« on: December 25, 2018, 08:16:27 AM »
Thank you everybody for the good news  and have a merry Christmas . Marc.

Pages: 1 [2] 3