Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Jb427

Pages: [1] 2 3 4
1
Non-FE Discussion Forum / Need some help advice on fitting A/C to a 66 67 fairlane
« on: December 10, 2023, 02:29:35 AM »
I am getting parts ready to fit A/C to my 66 fairlane next year my car was not an A/C car i have factory A/C vents that i want to use.
I would like to use hot/cold system dose anyone here have advice on what systems fit i still want to keep my glove box.

Big thing i need help with is heater A/C box no one makes a remakes a factory one and i don't know places to start looking even as i do not live in the USA.
vintage air systems would be fine too any help on what fitted good for you or people you know would be great

Cheers JB

2
Private Classifieds / NIB 66 Fairlane Distinctive Industries bucket Seat Back Panels.
« on: November 27, 2023, 08:58:03 PM »
Summit racing stuffed up and I ended up with 3 sets they are 114.00 per set from summit.

I have 2 extra sets of NIB 1966 fairlane Distinctive Industries Seat Back Panels part# 103984 in black.

Items are located in Australia I would like $100.00 Australian Dollars per set @ the time of this post $100 AUD = $67 USD + shipping.

PM or post if you would like shipping cost or more info


 

3
FE Technical Forum / low-mount sanden A/C compressor bracket
« on: November 23, 2023, 07:10:25 AM »
Dose any one know how i can get one of these low-mount ac compressor brackets

I found some info here https://www.fordfe.com/low-mount-sanden-a-c-compressor-brackets-long-post-t167725.html

Cheers

4
Private Classifieds / Looking for a new project 66 mercury comet cyclone
« on: September 21, 2023, 03:35:39 AM »
Looking for a complete starter car.

5
Non-FE Discussion Forum / Need help to find some parts
« on: May 23, 2023, 04:13:34 PM »
I need help to find a set of 66/67 fairlane front door panel emblems 500xl or gt or inserts missing dose not matter i would like ones with great chrome but ill look at any right now clips must be intact. I am not in the USA so it is almost imposable for me to find even bad ones

thanks

6
Non-FE Discussion Forum / 66 fairlane custom fuel tank breather leak
« on: September 10, 2022, 10:44:24 PM »
I have a custom fuel tank in my 66 fairlane with a return style fuel system my tank breather line is 1/2" runs around 2 foot vertical then has a rollover/check valve then the line runs back to behind the number plate and vents through the hole of the stock location gas cap.

when my tank is around 3/4 full it will leak i have looked at a few things i thought the rollover valve may of been opening and closing creating suction but i don't think that is the cause
I think the exit location behind the number plate may be the cause?

I like to see what people think could be the problem or a solution

top left of tank is breather under the trunk catch is the breather outlet  these are old photos with out the lines.

7
FE Technical Forum / early C6 to fe full manual valve body help
« on: February 27, 2022, 09:31:53 PM »
Got a call from my gearbox builder today letting me know he can't get the valve body i need dose any one know a good place to try for a full manual valve body for a early model case C6

8
Non-FE Discussion Forum / 1966 hardtop seat covers
« on: February 21, 2022, 01:03:05 PM »
I ordered a set of seat covers from Ecklers last year i just got a reply to my email asking how my order is going and they drop a "could take up to 28 weeks wait" If anyone know a good place i can try for a set that are quality please let me know. Thanks 

9
Private Classifieds / Wanted C6 to fe block plate/separator plate
« on: January 25, 2022, 07:31:31 PM »
I am after a C6 automatic transmission separator plate to ford fe i need the one with holes for lifter gallery plugs
I don't care about part numbers or date codes but i do want one that is complete and can be cad plated
Final problem I live in Australia so i am also looking for some one willing to take the time to ship it out side the USA.
I am looking in Australia i have a few more people to try but no luck yet
Thanks JB

10
FE Technical Forum / C6 flex plate what to get
« on: January 22, 2022, 08:32:15 AM »
What is a good flexplate for a c6 fe 600 to 700 hp rating?

11
FE Technical Forum / Need some help Scat cranks
« on: January 21, 2022, 12:27:57 AM »
I am having my auto built my builder wants to know the rear crank shaft sizes for converter location and flexplate i am using a scat std wt internal balanced 4340 4.250 crank pn# 4-FE-4250-6700-2200 I can't check mine as my car is running and driving

12
FE Technical Forum / reverse pattern shifter 66 fairlane
« on: November 10, 2021, 06:03:43 AM »
has any one seen or ran a reverse pattern shifter in a 66 67 fairlane with a console my old man is not having a good time with the 4 speed so its coming out for now and auto is going in so he can enjoy the car too.

I would like to keep the console factory looking but with reverse pattern shifter anyone here done or seen a fairlane like this?

13
FE Technical Forum / 66 67 fairlane big shaft top loader
« on: October 10, 2021, 09:56:59 PM »
I need some help I am trying to find what clutch fork i need for a big shaft top loader in a fairlane dose any one make them new?.

14
FE Technical Forum / Bolt in front coilover's
« on: September 08, 2021, 12:02:09 PM »
any one used bolt in replacements for std type shock spring set up for a bolt in adjustable coilover? no mods bolt in type

15
FE Technical Forum / Hurst shifter handle
« on: July 01, 2021, 11:43:27 PM »
dose anyone know the a part number for a shifter handle that will fit 66 fairlane bench seat with this style comp + shifter?

here is a link to the type of shifter i am using https://www.holley.com/products/drivetrain/shifters_components_and_accessories/manual_shifters/competition_plus/parts/3916848

Pages: [1] 2 3 4