31
Non-FE Discussion Forum / Re: Two post lifts
« on: June 15, 2022, 05:33:50 PM »
That’s what I’m seeing also. They seem reasonable and the quality seems to be ok.
Thanks
Thanks
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
Non-FE Discussion Forum / Two post lifts
« on: June 15, 2022, 11:44:45 AM »
Been looking around at lifts.
I know BendPak is the big name but anyone have any experience with Olympic?
Looking at 10k lifts because my truck is a bigun.
Suggestions welcome.
I know BendPak is the big name but anyone have any experience with Olympic?
Looking at 10k lifts because my truck is a bigun.
Suggestions welcome.
33
Non-FE Discussion Forum / Re: Guess the horsepower game, Ford 311 SBF
« on: April 17, 2022, 06:25:26 AM »
The thing that strikes me is you added 80hp with tuning. Whoa.
Oops forgot to guess.
Stangman took my number sooooooo…….I’ll go a bit more for fun 509hp, 475tq.
Oops forgot to guess.
Stangman took my number sooooooo…….I’ll go a bit more for fun 509hp, 475tq.
34
FE Technical Forum / Re: Get a big block Mustang they said , it will be fun they said.......
« on: March 29, 2022, 08:59:02 AM »35
FE Technical Forum / Re: Get a big block Mustang they said , it will be fun they said.......
« on: March 28, 2022, 05:29:24 PM »
Feel ya
But no towers helps a bunch.
But no towers helps a bunch.
36
Non-FE Discussion Forum / Re: Been waiting for it
« on: March 09, 2022, 10:22:16 AM »
Gotta go to Calif. to pick up my mustang this month. Fuel will cost twice as much at best. Took three days of work to pay for it while I’m out there.
Hah
Hah
37
Non-FE Discussion Forum / Re: Sad news - Danny Ongias 1942 - 2022
« on: March 04, 2022, 06:03:17 AM »
I remember when Danny first drove at Indy. Seemed as though he was mashing the pedal through the floor in the corners. At the time it was amazing. And of course his blue car exploits.
I did not know him but by far my favorite.
RIP driver.
I did not know him but by far my favorite.
RIP driver.
38
Vendor Classifieds / Re: SCE catalog
« on: February 06, 2022, 04:05:55 PM »
Shit.
Part of the problem with doing this.
That link I posted earlier is for an online store catalog. It doesn’t have all the pn’s. So the first 32 of you that viewed got the small store.
I put in the link for the full catalog. It’s a big file.
FEs begin on page 150.
Now have fun.
Part of the problem with doing this.
That link I posted earlier is for an online store catalog. It doesn’t have all the pn’s. So the first 32 of you that viewed got the small store.
I put in the link for the full catalog. It’s a big file.
FEs begin on page 150.
Now have fun.
39
FE Technical Forum / Re: TFS heads and rocker questions.
« on: February 06, 2022, 09:23:51 AM »
I just put the SCE catalog in the vendor section to help.
40
Vendor Classifieds / SCE catalog
« on: February 06, 2022, 09:14:55 AM »
I have asked Jay if this was ok and he gave me the go ahead in this part of the forum.
As many of you know my brother (and Athena of Italy) own SCE gaskets.
I try consciously not to recommend or give gasket “advice” for I would think obvious reasons.
But I do see questions being asked and I know many are not aware of SCE.
So I figure if I just give you the online catalog it may answer some questions and be of service to our little corner of the hobby.
I am not a part of the company and don’t know inner workings or reasons why, so I can’t/won’t/don’t want to, answer any questions.
I will however pass along requests.
I can say that they are trying to cover the FE world more and more but it takes time.
Here is the catalog. Hope it helps.
FE’s start on page 150. Gotta scroll.
https://www.scegaskets.com/wp-content/uploads/2021/12/SCE-Catalog-2022-V2__WEB.pdf
As many of you know my brother (and Athena of Italy) own SCE gaskets.
I try consciously not to recommend or give gasket “advice” for I would think obvious reasons.
But I do see questions being asked and I know many are not aware of SCE.
So I figure if I just give you the online catalog it may answer some questions and be of service to our little corner of the hobby.
I am not a part of the company and don’t know inner workings or reasons why, so I can’t/won’t/don’t want to, answer any questions.
I will however pass along requests.
I can say that they are trying to cover the FE world more and more but it takes time.
Here is the catalog. Hope it helps.
FE’s start on page 150. Gotta scroll.
https://www.scegaskets.com/wp-content/uploads/2021/12/SCE-Catalog-2022-V2__WEB.pdf
41
Non-FE Discussion Forum / Re: No More Work
« on: January 05, 2022, 12:42:00 PM »
Congrats Mike
I’m enjoying my semi retirement. Kinda nice when you can work when you want to. Which is less and less.
I’m enjoying my semi retirement. Kinda nice when you can work when you want to. Which is less and less.
42
FE Technical Forum / Re: Any issue changing over to aluminum ATI balancer?
« on: December 03, 2021, 02:08:25 PM »
If only someone made an adjustable pointer. 
43
FE Technical Forum / Re: Side Rod Clearance Question
« on: November 23, 2021, 06:48:36 AM »
Ahhh the Christmas Hallmark season and the wife. Makes me chuckle. Ho ho ho.
44
Non-FE Discussion Forum / Re: lost a member
« on: November 09, 2021, 01:31:28 PM »
Bummed, he seemed like a great dude.
Hope his family is ok.
Hope his family is ok.
45
Member Projects / Re: 445 in a 67 Fastback
« on: November 03, 2021, 08:40:40 PM »
Judging by his choice of front suspension the car will be getting the shock tower delete option....
It was to early to pay attention. That’s my story an’ I’m stickin’ to it.
