Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Heo

Pages: 1 ... 12 13 [14] 15 16 ... 18
196
Non-FE Discussion Forum / why eat that??
« on: April 03, 2017, 12:38:07 PM »
Its kind of a dry chocolate  taste a Little like a wooden chest
Duuuhhh! ??? Its from 1942 and have probably been in a wooden box since :o
https://www.youtube.com/watch?v=hmdLnPGZ0Rc

197
FE Technical Forum / Rocker system
« on: March 21, 2017, 03:30:15 PM »
What rocker systems is there available.  My rockers had the
tips grinded by...Stevie Wounder. And the oilholes on the shaft
 turned down so the whole assembly is more or less junk
Its just a regular street engine comp 292S cam so i don't
need any fancy stuff

198
Non-FE Discussion Forum / My wounder winter land
« on: February 28, 2017, 03:56:02 AM »
Look what you all are missing. Blizzard
With 40mph winds 6 inch of snow on the road
and no plowtruck in sight

199
FE Technical Forum / Lincoln Brakes
« on: December 21, 2016, 04:11:49 AM »
Not sure if this is technical or non FE  but kind of technical.
In the 80s i did some work on a early 60s Lincoln Continental
As i remember it, It had Aluminium Brakedrums Any one knows
If you can fit them to a 64 Galaxie spindle?
Think they should look good behind my AR TQ Thrusts
The thunderbird is built on the Lincoln and as i remember it.
They have same brakes as the Fulsize ford. Right me if im wrong

200
FE Technical Forum / Heads
« on: December 17, 2016, 02:16:37 PM »
In search for some rocker arm i found two heads  C7AE-A And C8AE-H
Are they boat ancors or what?

201
Non-FE Discussion Forum / Old seal rifles
« on: November 10, 2016, 06:02:51 PM »
My father bought some seal rifles.They where
a local guntype along the coast to hunt seals
On the sea ice in the spring caliber from ,500-
Almost one inch Mussel loaders changed from
flintlock to percussion and the oldest is probably
pre flintlock
They had the gun mounted on a ski with a white
sheet with a hole to aim through.And crawled on
the stomach towards the seal.They had to get in
fifty yards range to get a instant kill. If not the seal
would dive in to the water and be lost. Many men
was lost forever if there was a storm and the ice
opened up

203
Non-FE Discussion Forum / Reino Rauhala
« on: October 24, 2016, 06:03:21 PM »
One of the few in Sweden that raced a S.O.H.C Reino Rauhala
Have died  10/22 at the age of 75 Dont know if any of you guys
knew him

204
Non-FE Discussion Forum / British twins
« on: August 15, 2016, 04:04:26 PM »
I think there is nothing that sounds better than a British
parallel twin
https://www.youtube.com/watch?v=SqkR4Os0tgA

206
Non-FE Discussion Forum / Proform Carb
« on: July 28, 2016, 04:09:56 PM »
Anyone that have tried a proform  Carb? 
I see mixed reviewes on the net, But almost
anything gets mixed reviewes
 

207
FE Technical Forum / Cam Centerline
« on: July 27, 2016, 02:34:04 PM »
I was degreing the cam. Its a compcam 282 s with 106 deg.center line
( I ordered a 294  ??? ) The closest i get is 110 either the cam or timing
gear is wrong. I suspect the timinggear, Is it worth trying a new camdrive
or can i run it like that with 4 deg retard? 390+060  10:1 cr

208
FE Technical Forum / For Jay
« on: July 24, 2016, 07:32:49 PM »
I think it was you that have some thoughts about 4 valve
SOHC heads with stock cams. And i told you about "fork"
rockers i had seen
 Here they are

210
Non-FE Discussion Forum / What we found outside a car show
« on: July 16, 2016, 10:18:40 PM »
Me and the wife was at a smaler carshow in the next town
in may  and found this parked outside

Throw away the fenderskirts and connikit and ad some nice wheels and a healty FE

Pages: 1 ... 12 13 [14] 15 16 ... 18