I’ll say it’s well deserved. Beautiful car Leny!!!!

Here’s a list of cars with 3G alts that I have used for many years in case you go yard diving. I’m sure there are more but this’ll get ya started.
130G Alternators:
94-96 Mustang 3.8 V-6
94-95 Mustang 5.0
94-96 Thunderbird 3.8 V-6 (non SC)
95-96 Windstar 3.0 V-6 (most are 3.8's)
93-96 E/F series Trucks/Vans 4.9 L6*
96 Sable 3.0 V-6
94-96 Cougar 3.8 V-6

It looks like the ‘67-‘68 molding is damn near the ‘66 version so I don’t see a problem making this fit. It will just require some redrilling of holes and trimming here and there. Really amazing how well it fits but then we all know Ford tried to re use as many parts as possible so it makes sense.
Anyway for anyone stuck in this same predicament it looks at first fit like the later version will fit the earlier.

Not sure on the 65/66 cars but on my 68 Fastback each side has 2 pcs.First pc riveted in and then the channel.On my 67 Coupe it is only one pc..I think you are in for a long hunt....

Agreed
It’s three total pieces the one piece that is available rivets or flat screws in. The channel goes on top of it to the inside and the gutter trim piece connects with the first piece to give you a full width of stainless.
As the guy said, “needle in a haystack”
I will probably buy a 67-68 and see if it can be modified to work.

Thanks Mike, no dice on the first guy. He thought that Dynacorn made them, they do not.
In my research I’ve read that a 67 channel can be made to fit the 66. This may be the way to go if it can be done. I may buy one to try it.
On the used pieces, since nobody makes them the used parts when found are stupid prices. I remember before I moved I was trying to find a pair and did locate one at Mustangs etc. in Van Nuys. They wanted 800 bucks for a nasty pair and as I was moving I said no thanks.
Mustangs and Fast Fords is trying to locate but their words were “needle in a haystack”.

Best of luck on your mend Doug.
I’ll repeat the above. You are a big asset to our community.

Wow, lotsa work and looking beautiful

Hi Garry
Located in Columbia, Tennessee.
I’ll go over and weigh them this week and work out the cost of the trip. Give me a day or two.