Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - John67427

Pages: [1]
1
FE Technical Forum / FE bellhousing needed - QuickTime info
« on: July 18, 2022, 12:01:43 PM »
Sent by FedEx my Lakewood bellhousing to fab shop to have window put in and after a week of no show at shop I got info from FedEx that trailer caught fire and all goods are lost. Needless to say not a good situation as the Lakewood bells are discontinued and rumor has it the quicktimes have fitment issues. Does anyone have any real world experience with the QuickTimes in a 1967 Fairlane with headers??
  Anyone have a spare Lakewood bellhousing for an FE part # 15210 or if it works Quick Time RM 6057 SFI
Thanks in advance. - John

Update: spoke to QuickTime and they won’t work with normal clutch linkage at least on Fairlane.

2
Private Classifieds / SOLD………
« on: February 25, 2022, 06:28:27 PM »
[b[/b]I have a used set of rear shocks with 38 runs on the pair. I had switched to higher horsepower engine and found I needed double adjustable for my set up. These were purchased when Calvert still just sold the Rancho shocks without his name on them.
They will work for other Ford products. $130 plus shipping

3
Private Classifieds / Cometic head gasket - FOUND! THANKS BRENT LYKINS....
« on: May 24, 2021, 02:02:34 PM »
Shot in the dark here... Any one have a Cometic head gasket C5840-040 they would be willing to sell?
Can’t get one from Cometic till around 1st of July. If you do send me an email.
Thanks
jjn38d@gmail.com

4
FE Technical Forum / Blue Thunder - HI Rise aluminum head torque specs
« on: September 07, 2019, 03:52:26 PM »
Would anyone have any info on torque specs? Blue Thunder aluminum Hi Rise heads on aluminum Shelby block. Going to have to do some maintenance and realize I have no info for torque specifications.

5
Non-FE Discussion Forum / Quality fuel pressure gauge
« on: May 03, 2019, 01:41:11 PM »
 Has  anyone found a decent fuel pressure gauge? I’ve had a Moroso then a Holley now a liquid filled Aeromotive. Looked at the Aeromotive today and the needle is at 4 lbs and will not go lower. Used the pressure relief valve since it is liquid filled and did not change I’m not a fan of liquid filled gauges but thought it may be a better quality and can relieve the pressure for accuracy. Aeromotive said they would replace it but looking for options as I have not had good luck so far.

6
Private Classifieds / SOLD *****Dove Mfg. HI Rise end stands SOLD*****
« on: March 31, 2019, 02:31:52 PM »
New set of Dove FE Hi Riser end support stands with standard bolt on or head stud bolt down. I never ended up using them. $215 including shipping to lower 48.

7
Private Classifieds / Centerforce DF559000 11” clutch kit
« on: March 15, 2019, 01:34:02 PM »
This street clutch has 14 miles on it. I thought I would put my race car on the street for a summer.... Wrong :(    Went to one show brought it home and put it back in race trim.
  It is an 11” disc 1 3/8” X 10 input. Looks like new in the original box.This can be used for FE or 385 series motor.  Clutch lists for $456 and will sell for $250.
Will listen to offers....
  Can bring to the FE Reunion race in April.

              John

8
Non-FE Discussion Forum / 3D Plastic printing
« on: January 30, 2019, 07:41:58 PM »
Has anyone had any experience with this technology? It would be for only 6 of the same part - small tachometer base. Just curious on costs

9
Private Classifieds / MSD 7 AL3 #7330 Black Box
« on: October 29, 2018, 12:58:30 PM »
I have a Factory Reconditioned MSD 7 AL 3 for sale. It is new from MSD Factory recon. I purchased this as a spare for my car. It was tested by me in my car to be sure it worked and it  works as it should. I am selling it because my car has a Holley Annihilator ignition set up and Holley quit making them many years ago. I did have a spare Annihilator box which I had to use last year as the original box went south. That left me without a spare ignition box and I try to have two of everything with me when I race. Could not find any Holley boxes so I purchased this as my back up. Found a Holley box so I don't need this one. Includes all the chips for rpm and retard/ advance chips plus I purchased an adjustable shiftnoid chip so I could set my own specific launch rpm.
  I paid $599.99 and will sell it for $499.00 plus  $ 14.95 shipping.  A new box retails for $729.00
 Any questions, let me know.
                                                                                            John

10
FE Technical Forum / Engine Builders- Valve Spring cleaning procedure??
« on: March 24, 2018, 04:12:36 PM »
  MY first time doing my own valve springs. Chamfer and remove all sharp edges for retainers and seats. Articles I've read say not to clean with solvent. What do you use to clean the grit off? I understand if you don't oil the springs right after cleaning as rust could start. What is the proper procedure???

11
Private Classifieds / Moroso # 63750 Electric water pump drive - SOLD
« on: March 22, 2018, 01:43:12 PM »
 Selling Moroso # 63750 electric water pump drive. Works great on FE motor. All items that came with pump are included ( bolts, sleeves ) SOLD!!!!!!

12
FE Technical Forum / Lakewood bellhousing- adjustment door
« on: January 29, 2018, 07:48:44 PM »
Has anyone had the ability to have an adjustment door put on from Lakewood or someone else?
 I’m to the point that I will need to check air gap and will need to have access at the 6 o’clock position

Pages: [1]