Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - GJCAT427

Pages: [1] 2 3 ... 44
1
FE Technical Forum / Re: 427 block with no spacers
« on: December 03, 2023, 12:26:30 PM »
I made a set for one of my motors, it took a while to do but they all fit just fine. It also helped that I have a stationary disc sander to play with. The big thing was to sneak up on the gap measurement. A mike is a must, as well as an inside snap gauge.

2
FE Technical Forum / Re: Advertised VS real world connecting rod weight
« on: December 01, 2023, 05:56:14 AM »
Someone with a fat finger who wrote the ad specs missed while typing.

3
FE Technical Forum / Re: Brake Line Seepage
« on: May 15, 2023, 05:13:46 AM »
I bought the Mastercool  kit and played with it before I actually made permanent lines. I love it. Have done dozens of lines and no problems yet. I have tried it on SST but the results weren't the best. You got to shop for good SST brake line. Alot of cheap SST on the market. The Mastercool is worth the price and has paid for itself.

4
FE Technical Forum / Question on carb price
« on: March 29, 2023, 05:20:03 AM »
This may not be the place to ask, I got a friend that purchased a 750 Holley double pumper carb that appears to be NOS, in a bunch of a parts lot. It appears unused and has no box, It has some shelf ware but looks dull. I`m wondering what it might be worth? He said to make a reasonable offer. Any Ideas?

5
FE Technical Forum / Re: FE fuel pump eccentric Recommendations.
« on: March 26, 2023, 11:43:39 AM »
I don`t think it makes much difference. I have run the drives both ways and never had any problems. This is on both 427s and 390s.

6
 My dad always said that when you rebuild something do it right or don`t do it at all. Not removing that shield was always a 1st priority in a rebuild or a manifold swap.

7
Non-FE Discussion Forum / Jay can you contact me.......
« on: March 03, 2023, 06:46:11 AM »
I`ve got a question on the sonic tester.  Garry

8
 Merry Christmas and Happy New Year to all of you Guys. Hoping to get out and about this yr.

9
FE Technical Forum / Re: Jay: Possible VC style for your production
« on: December 26, 2022, 06:26:23 AM »
 Royce, have you ever seen the amount of waste a plasma cutter generates? At the price of SST and AL you would not get a decent payback on the parts you're making. The valve cover rails would generate alot of waste unless you could combine another part at the same time to use up the inner blanks that would result. I go through this at my shop.

10
Private Classifieds / Re: Clearing the decks
« on: December 25, 2022, 09:10:09 AM »
 Any Idea what the shipping would be to western NY on the 406 heads 14787 zip code. Alsowhere are you located? road trip might be possible. Garry

11
FE Technical Forum / Re: Jay: Possible VC style for your production
« on: December 25, 2022, 08:40:49 AM »
 I know that when ever I have my 56 F100 out at a cruise and the hood is up, I get a lot of questions about them. let it idle and people do a double take when they see it. I have to rev it a little to show the oil splash. The other thing have I on it is a clear cover on the dual carb Setup. People are shocked when they see it. I really would like to find a clear distributor cap for a stock  dist or a Mallory dist.  So far no color change in the covers. I still have to put the light kit in them. Whenever Jay makes more clear covers for the FE I will be on the list.

12
Private Classifieds / Re: Selling a 65 F100 .. an a bunch of Fe Parts
« on: December 16, 2022, 06:20:58 AM »
What kind of money are you looking for rod, mains and cam Brgs.  Also a couple gasket sets.


13
FE Technical Forum / Re: Mini starter question
« on: December 12, 2022, 12:44:48 PM »
 I bought a RobMc  starter yrs ago for my 427 Galaxie.  Most of the rebuilds couldn`t take the strain. They were realy helpful when I couldn't get the starter to engage right. The sent me a correct shim pack to stop the binding and all was well. My63 has factory long cast iron manifolds so there is a lot of heatsoak when you shut it off. The starter spun the motor over with no problems. I will be buying another in the near future. Well worth the money.

14
FE Technical Forum / Roller cam and lifters for a 410-tow engine?
« on: December 04, 2022, 10:37:46 AM »
 Been rethinking about the cam and lifter debacle with flat tappet cams. I been reading about the latest rash of cam and lifter failures and wondering if it would be worth the time and money involved to switch now that I`m getting close to building the engine. I`d like some opinions. This motor will be used to tow and drive daily as well as a work truck. It`s a 64 F 350 flat bed with a Sterling rear and a 5 speed over drive or a C6 tranny. Still working on the Tranny choice, Opinions?   

15
FE Technical Forum / Re: 428CJ exhaust manifolds in 67-72 F250?
« on: November 23, 2022, 05:57:30 AM »
  I used the 62-64s

Pages: [1] 2 3 ... 44