1
Private Classifieds / WTB ‘64 Galaxie bucket seats
« on: August 31, 2023, 03:23:00 PM »
I’d like to find some period correct seats for my 64 Galaxie lightweight tribute. Thanks
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
The TCI solenoids I use, you have to pull the disk/plunger back by hand to test if the engine is not running. Otherwise it just stays in the "activated" position after one test. Not familiar enough with a glide to say what internal issues might be going on. I understand that the brake action is low+reverse, so if it's not holding even with a bit of RPM to insure pump pressure the problem would be in those areas, or the solenoid not setting the valve in the right position. FWIW I've had good luck talking to TSR, but I also get help from my local guy - Freakshow Performance.Thanks, I read the troubleshooting part, guess I’ll have to pull it and find someone to look at it.
Specific to a TCI part but may have clues that you could use
https://www.onallcylinders.com/2012/01/10/step-by-step-installing-tcis-powerglide-trans-brake/
the reverse clutch is not working , a pressure gage is needed in the case on the rear reverse port to see if there's any pressure , if it has pressure most likely a clutch problem , if it has no pressure then it's a valve body problem ... Does the Manual valve feel normal shifting from park to 1st and all between ?Yes, it seems to work okay going forward.