Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - simonlegree

Pages: [1]
1
Private Classifieds / Re: WTB 428 Ford Standard pistons
« on: February 09, 2020, 06:18:04 PM »
Keith, do the pistons include pins and locks? Do you have a picture or can you call me. Phone number is (562) 242-5924. address is 12680 W. Running Brook Drive, Boise ID. 83713. I'm pretty interested in your offering

2
Private Classifieds / Re: WTB 428 Ford Standard pistons
« on: February 08, 2020, 01:30:23 PM »
If you will, give me a quote on pricing and shipping, I'm in Boise Idaho.
Thanks gents.

3
Private Classifieds / WTB 428 Ford Standard pistons
« on: February 07, 2020, 05:28:46 PM »
Hey FE guys, I'm looking for a set of 428 Ford pistons with a standard bore. I'd like to buy Sealed Power/TRW's or what ever is out there. New or  good used would be good, preferably new. Let me know what you have if your looking to sell.
Thanks.
Steve Legree

4
FE Technical Forum / Anyone seen Cobra Jet heads with these mods?
« on: January 13, 2020, 12:18:12 PM »
I inherited these heads on a 428 wanna be 390 and I've never seen these modifications. What really throws me is the intrusion into the combustion chamber with steel plugs run through the lower exhaust manifold bolt holes. The heads resemble medium riser combustion chambers, have CJ intakes and Med riser exhaust valves. There is light porting and surfacing on both the cylinder side and exhaust manifold side. The heads have all new valves, springs, retainers, keepers , and guides. Someone has done lots of work here and I would like to get some opinions on whether these are useable or crap. Will they work on a street 428? Thanks for your opinions guys.
regards
Steve Legree
 



5
Member Projects / Anyone seen Cobra Jet heads with these mods?
« on: January 12, 2020, 06:57:58 PM »
I inherited these heads on a 428 wanna be 390 and I've never seen these modifications. What really throws me is the intrusion into the combustion chamber with steel plugs run through the lower exhaust manifold bolt holes. The heads resemble medium riser combustion chambers, have CJ intakes and Med riser exhaust valves. There is light porting and surfacing on both the cylinder side and exhaust manifold side. The heads have all new valves, springs, retainers, keepers , and guides. Someone has done lots of work here and I would like to get some opinions on whether these are useable or crap. Thanks for your opinions guys.
regards
Steve Legree

6
Vendor Classifieds / Re: Scavenger Hunt - various FE parts, some new, some used...
« on: July 14, 2018, 10:28:29 AM »
Barry, do you still have the 2291F pistons for sale? My email address is slegree@centurylink.net.
Thanks,
Steve legree

7
Private Classifieds / Cobra Jet C6 cast iron tail shaft for sale
« on: July 13, 2018, 08:47:59 PM »
Good looking cast iron tail shaft for CJ/PI C6 currently for bid on ebay. Just lowered the price item number 153097347497. Thanks (SOLD)

Pages: [1]