Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - centredautomag

Pages: [1] 2 3
1
FE Technical Forum / Re: MSD steel distibutor gears
« on: March 28, 2022, 10:33:46 AM »
I have and old iskendrerian mech. roller cam can I use the mallory 29420 gear with it. thank Marc.

2
FE Technical Forum / Re: Another valve train question
« on: January 21, 2022, 05:27:04 PM »
I needed .200 on my craft heads with Harland sharp rocker set.Marc

3
FE Technical Forum / Re: Overheated fresh rebuild
« on: April 06, 2021, 05:51:41 AM »
Make sure you have the right size plug.can t remember size but someone here will tell you.

4
Member Projects / Re: 1964 Comet Blown injected Cammer
« on: December 07, 2020, 06:59:22 AM »
Like your set up ,great job. Marc

5
Good Deals! / Re: Brent Lykins
« on: April 11, 2020, 08:46:34 AM »
Got a set of heads and a custom cam and lifter from Brent for my 482 . Engine done in the car and is exactly what I wanted .
Thank Brent.

6
FE Technical Forum / Re: 390 FE Carburetor Size
« on: November 17, 2019, 07:49:49 AM »
Ask Drew to build you a carb.
Marc.

7
Non-FE Discussion Forum / Re: Bad day at the Coffeyville Street Drags
« on: October 01, 2019, 04:57:36 PM »
I go to st- joseph one in a while and it is very scary up the hill but they are not called beauceron for notting . We have are own redneck .
Marc

8
Member Projects / Re: 427 In the car and running
« on: April 23, 2019, 11:30:41 AM »
 Some engine speck.
   
     482 c.u 
      9.8 comp.
      cnc pond heads prepare by Brent. (very nice)
      comp cam spec by Brent. dur. 299   .579 lift intake
                                           dur.311    .586 lift ex
                                            110 lobe sep.
     harland sharp rocker set
    bbm tunnel wedge
    2-600 carbs done by Drew (very nice carbs,good person to deal with)
  could not wait for dyno shop so if you guys want to play the gessing game I would be happy to know what you are thinking.

9
Member Projects / Re: 427 In the car and running
« on: April 23, 2019, 11:12:56 AM »
Drew can you e mail me a copy of the bill for the gt carb please.
 thanks

10
Member Projects / Re: 427 In the car and running
« on: April 23, 2019, 11:06:51 AM »
carb is going on a 67 cougar 390 gt

11
Member Projects / Re: 427 In the car and running
« on: April 22, 2019, 09:48:00 PM »
thanks everyone ,, hope to see you all a the FE reunion

12
Member Projects / 427 In the car and running
« on: April 22, 2019, 06:08:11 PM »
 finally done , in the car and running with my other cars also , on  you tube https://youtu.be/5q8QMS6TjpE

13
Private Classifieds / w.t.b. caltracs and 2x4 air filter
« on: April 16, 2019, 11:58:19 AM »
 We are going to the reunion , if someone as a used 2x4 air filter with the badge on top  and a caltracs setup for 1963 galaxie I would be
 interested . It would save me some shipping.
     thanks Marc.

14
Member Projects / 1963 galaxie motor mount brackets
« on: March 17, 2019, 01:20:36 PM »
Need help. tried to put my fe in today and somebody modify the frame brackets for the motor mounts. Picture and some mesurement would help me a lot. I have a 1960 frame in back of the shop but I don t know if it is the same brackets . If they are the same Iwill take them off and use those on my frame.

  thanks  Marc.

15
Member Projects / Re: new engine
« on: March 06, 2019, 08:11:30 AM »


I hope to have a set made before the fe reunion to bring over to show people and then offer some for sale.

      Marc.

Pages: [1] 2 3