Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Chrisss31

Pages: [1] 2 3 ... 10
1
FE Technical Forum / Re: Electric versus Flex Fan
« on: January 19, 2024, 07:35:56 PM »
Perfect, that's more or less in line with the original plan.  The radiator is a Mustang radiator for a 67,8,9... FE equipped car, hopefully it'll give me a little more room for a fan than the original radiator.  It is wider, but the lower hose is not offset all the way to the edge of the lower tank.  Once I get a water pump on the block I'll have a better idea of where to start.  I appreciate your input and the links you sent!

2
FE Technical Forum / Re: Electric versus Flex Fan
« on: January 18, 2024, 12:28:14 PM »
Question for Scott- What would be your preferred setup?  I have never been fond of electric fans, mostly because I like to keep things as simple as possible.  More or less getting the job done with the least amount of parts, least amount of clutter, least amount of future problems.  My build is a 66 Mustang with a 482" FE, contrary to my previous thoughts of keeping things simple, I did make one concession to run port EFI on a tunnel wedge.  I have the big '68ish aluminum Griffin radiator and was originally thinking I would put a shroud on the radiator with a flex fan (simplest), or possibly a conventional fan/clutch.  To 68 Galaxie's point, I do also have the ability to manage the timing at slow speeds as well.  What are your thoughts?

3
FE Technical Forum / Re: Electric versus Flex Fan
« on: January 18, 2024, 10:26:16 AM »


He's a one man business. The product is good tho. If you REALLY want the latest greatest these are the guys I'm looking at for my Fairlane.

Their fans put out huge cfm (they have videos showing testing) and their controller is about the nicest I've seen yet.

https://deltapag.com/

That looks pretty slick.  I'd like to see the actual CFM reading through a radiator though.

4
Non-FE Discussion Forum / Re: Northernlight
« on: December 21, 2023, 09:55:39 PM »
Very cool, something I hope to experience in my lifetime.  Merry Christmas to you too!

5
Private Classifieds / Re: Crites Estate Auction in Ashville, Ohio
« on: November 28, 2023, 08:59:37 PM »
Is the business going to keep going?

6
Private Classifieds / Re: For entertainment only
« on: November 13, 2023, 09:01:39 PM »
SERIOS INKWIREIES ONLY

7
Member Projects / Re: Project 503 aluminum FE
« on: August 25, 2023, 07:43:16 AM »
Nice write up Keith!  I always give the garage a deep clean and put everything where it belongs before I start a project.  Although, my garage isn't as cool as yours.

8
FE Technical Forum / Re: Coolant recovery
« on: June 06, 2023, 09:19:00 PM »
Got it.  I was curious because the big trucks at work typically run surge tanks with a hose to the ground and they work out OK as long as they aren't over filled.  It's without a doubt more friendly for the environment to catch what pukes out.

9
FE Technical Forum / Re: Coolant recovery
« on: June 05, 2023, 08:12:25 PM »
Do you need a recovery tank when using the surge tank?

10
FE Technical Forum / Re: 1965 Mustang with 427
« on: April 16, 2023, 08:51:33 PM »
I thought maybe Gas Ronda was a survivor but it's not.  The rear axle is moved forward such that the wheels are right at the back of the doors and the engine is pushed back as well.

11
FE Technical Forum / Re: 1965 Mustang with 427
« on: April 15, 2023, 03:22:04 PM »
Thank you Kevin.  The story I read made it sound as though they were street cars, but I'm certain these are the 11 cars they were talking about.  The article you posted a link to was a great read, they covered the work very well.  I'm surprised that all DST/H&M did to stiffen up the cars was adding roll cage unless there was other work done that wasn't shown.  Cool pictures.

12
FE Technical Forum / 1965 Mustang with 427
« on: April 14, 2023, 09:02:48 PM »
I stumbled on a clip today that said Ford rolled out 11 Fastback Mustangs in 1965 with 427s.  Does anyone know if this is true?  I'd like to read about this or better yet see some pictures.  Any info would be appreciated.

13
Order now and keep looking elsewhere....

14
Non-FE Discussion Forum / Re: I quit drinking
« on: January 09, 2023, 09:56:04 PM »
Good for you!  I've never been much of a drinker but I've been around enough of it to know how hard it is on you and those around you.  You're a better man without it, guaranteed.  It's always heart warming for me to see fellow man succeed.  Keep up the good work bud.

15
Non-FE Discussion Forum / Re: checking on Blair
« on: January 05, 2023, 08:54:01 PM »
I chatted with Blair by text a few days ago, he is at the shop working.  I know he has a lot or irons in the fire and is having a hard time holding onto good help.  That's kind of the theme song for most small businesses right now unfortunately.  I don't like to distract him during the workday so I usually send him a text and let him get back to me when he can.  That seems to be the best way catch up with him.

Pages: [1] 2 3 ... 10