1
FE Technical Forum / Re: Rocker system
« on: March 21, 2017, 04:11:04 PM »
T and d street rockers
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
FE Technical Forum / Re: Hydraulic clutch
« on: March 13, 2017, 11:51:11 PM »
Kirkham Motorsports has the best set up for the fe using a QuickTime bellhousing. Has adjustments for pedal feel and they make it in house. All billet construction. I ain't cheap.
3
FE Technical Forum / Re: New revised Street Pro Port
« on: February 21, 2017, 08:24:43 PM »
Is a pro port a head,basically un done head the designer can make it whatever he wants. Is this what Keith craft starts with. A blank head for the stage 2.
4
FE Technical Forum / Re: 462 build: Stage II or Stage III or....?
« on: February 11, 2017, 04:37:43 PM »If the KC II heads are still in the $2500.00 price range, they are by far the best bang for the buck in flow. I have had several sets through my shop, and after the first few, they have been very good in flow. I have no reason to give out numbers, but when they hit 338 cfm at .750" lift, that is decent for the price and with a 2.190" intake valve, .700" lift springs, etc.. I don't thing flowing them to .900" is productive for bragging rights. Just my opinion. He asked, I answered. Joe-JDC
They are. I just bought a set. $2500
6
FE Technical Forum / Re: Oil. 10/30 vs 10/40 w
« on: February 11, 2017, 06:09:18 AM »
I have an oil cooler but do not use it.
7
FE Technical Forum / Oil. 10/30 vs 10/40 w
« on: February 11, 2017, 12:10:19 AM »
I have an all aluminum 496 fe. I use brad penn oil. Would you recommend the 10/30 or the 10/40 or does it matter. I do some road racing and auto x about 70% street 30% racing. I live in Las Vegas.
8
FE Technical Forum / Re: Industrial 427 Blocks
« on: January 23, 2017, 02:52:21 PM »
Our power stations in az use Cummins engines to run the generators.
10
FE Technical Forum / Re: FOR IMMEDIATE RELEASE ... The FE Race & Reunion is Celebrating 5 Years
« on: January 19, 2017, 10:05:21 PM »
Sounds awesome
11
FE Technical Forum / Re: RPM manifold
« on: January 15, 2017, 10:47:12 PM »
Their not the best looking intake but they sure work.
12
FE Technical Forum / 427 fe side oiler. What's it worth
« on: January 13, 2017, 11:59:56 PM »
I met a guy yesterday who has an original 427 side oiler. The engine is complete and in very good confition. He said he has had it for a while and pulled it from the car 2 years ago. Has 20,000 miles he believes. What is something like this worth. This is all the information I have so far but will be seeing the engine in person myself next week and I will get pictures and all additional information needed. He is selling the engine to me if I want. Any ballpark ideas what its value is before I go check it out. Thanks.
13
FE Technical Forum / Re: Need help with cam shaft swap??
« on: January 13, 2017, 03:48:56 PM »
Thanks jay
14
FE Technical Forum / Need help with cam shaft swap??
« on: January 13, 2017, 12:36:36 AM »
I have a 427 fe side oiler. Engine has 3000 miles on it and is out of the car now. It has a hydraulic roller cam now and I will be replacing it with a slightly more agressive hydraulic roller cam. What steps do I need to follow to make this happen. I have a mechanic friend with all the tools that will be helping me. I just want to make sure we do it correctly and I know this is the place for all FE. Thanks for any help.
It's a complete motor from carb to oil pan.
A step by step explanation would be best.
It's a complete motor from carb to oil pan.
A step by step explanation would be best.
15
FE Technical Forum / Re: Cool FE cars at Mecum
« on: January 10, 2017, 01:09:51 AM »
I thought I saw a guy with a camera drooling on all the cars. 