1
FE Technical Forum / Re: Headers (another one for the rocket scientists)
« on: February 19, 2022, 05:02:32 AM »
This is why pickup headers work good straight out and smooth bends .
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
FE Technical Forum / Re: Ray Paquet
« on: February 04, 2022, 04:22:15 PM »
Hemi has its own ciass they are allowed to do cyl work the the rest cant you cam one big the valves hit one another So they get to move them a true stock hemi they are not.
3
FE Technical Forum / Re: 9" Limited Slip noise.
« on: January 15, 2022, 03:50:16 AM »
If you use a ford tool to check clutch pack shims it makes a difference no two are the same. Look in a shop manual it shows you how. You can get a tool off ebay i got mine from otc years ago but they no longer sell them.
4
Private Classifieds / distributor parts wanted
« on: December 22, 2021, 11:09:44 AM »
Wanted Dual point breaker plate out of any ford with a dual point and vacuum advance
5
FE Technical Forum / Re: shaving cyliinder head surface to increase compression
« on: December 05, 2021, 10:31:42 PM »
Do you run steel shim head gaskets.If you cut the heads to much you may have to cut the intake.
6
FE Technical Forum / Re: FE iron head guide issues?
« on: November 30, 2021, 11:00:33 PM »
What do they make to add to the gas to take the place of lead the old tractor guys add something to save the seats
7
FE Technical Forum / Re: FE iron head guide issues?
« on: November 30, 2021, 10:58:06 AM »
That is why I ask about restricted i also think like you its not getting the oil it needs i would check the rocker arm shaft for wear also,
8
FE Technical Forum / Re: FE iron head guide issues?
« on: November 30, 2021, 05:27:00 AM »
Do you have restricters in the heads
9
Private Classifieds / Fe cams on sale
« on: November 03, 2021, 04:08:38 PM »
Crower has several fe cams on clearance for $72 dollars
10
FE Technical Forum / Re: It's Alive! But needs help...
« on: October 23, 2021, 09:22:26 PM »
I do not think the fan setup you have will work keep your stock parts
11
FE Technical Forum / Re: The dreaded clunk
« on: October 23, 2021, 10:41:11 AM »
I like the locktite idea
12
FE Technical Forum / Re: The dreaded clunk
« on: October 22, 2021, 03:23:48 PM »
Time to go to habor freight and get one of their small tellascoping magnets its small enough to go down from the top i think.
13
FE Technical Forum / Ray Paquet
« on: September 03, 2021, 10:16:55 AM »
Mr Paquet wins ss/a at indy with a real thunder bolt l think its number 30 class wins sure makes hemi and rat look bad. He sure knows how to build a fe.
14
FE Technical Forum / Re: Clutch issues
« on: August 14, 2021, 08:27:22 PM »
The good old days we all had one hell of left leg but dog tracked when we walked.
15
FE Technical Forum / Re: Pick my camshaft.
« on: August 14, 2021, 09:57:30 AM »
I have had good luck with a Lunati version of a 428 cj cam Crower cam saver lifters and Alexs spring kit about 425.00 last one i did.It is a flat tappet and you want a roller do you have headers better intake what gear you could take the money you save on the cam and get better parts.