Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - fallguy72

Pages: [1] 2 3
1
FE Technical Forum / Re: nitrous oxide
« on: November 03, 2021, 05:54:37 AM »
Fuel pressure is absolutely the most important thing. If you want to just t off of the mechanical pump don't plan on spraying for long. I use an extra electric pump that turns on when the system is armed. I have had good luck 200+ 1/8th mile passes spraying 150 445FE.

2
Member Projects / Re: 1965 fairlane
« on: March 05, 2019, 10:02:04 PM »
Can't wait for the snow to go!

3
Member Projects / Re: 1965 fairlane
« on: January 15, 2019, 08:51:03 PM »
Front sump pan with rear tie rods on a straight axle. its the motor i will be running this year. E400 edsel. i am putting the E in FE!

4
Member Projects / 1965 fairlane
« on: January 14, 2019, 03:43:51 AM »
My 1965 fairlane 500 sports coupe. Straight axle project.

5
Member Projects / Re: 1965 Fairlane 500 sports coupe work in progress.
« on: February 20, 2018, 10:08:33 AM »
https://postimg.org/gallery/3ck8qgruu/ just trying out postimage.org

6
Member Projects / Re: 1965 Fairlane 500 sports coupe work in progress.
« on: February 14, 2018, 11:51:45 PM »
A shot of rear sump oil pan resting on the cross member

7
Member Projects / Re: 1965 Fairlane 500 sports coupe work in progress.
« on: February 14, 2018, 03:24:21 PM »
Jay Brown could you possibly post some pictures I would be eternally grateful! No rush

8
Member Projects / Re: 1965 Fairlane 500 sports coupe work in progress.
« on: February 14, 2018, 01:11:59 PM »
Jay Brown there seems to be major clearance issues with the oil pump/ pan even with the rear sump. Steering clearance issues as well. I didn't put the mustang 2 front end in and if I move it down I see more issues with steering. The other alternative is a Chevy engine ...NOT!

9
Member Projects / Re: 1965 Fairlane 500 sports coupe work in progress.
« on: February 14, 2018, 07:43:29 AM »
Lutz is my Family name. building this Fairlane for 1/8th mile racing one day. hope to stroke  it to 445 cid one day (like my 66) but the goal right now is to get her running. racing season is coming quick and so many things to do.

10
Member Projects / Re: 1965 Fairlane 500 sports coupe work in progress.
« on: February 14, 2018, 12:44:37 AM »
Stìlĺ having trouble with picture size

11
Member Projects / 1965 Fairlane 500 sports coupe work in progress.
« on: February 14, 2018, 12:28:52 AM »
Working on my other car as time and money permits. plans are a for a straight axle to accommodate my 66 390 gt s-code backed by a c6 and ford 9". Chrome for the sides is going on tomorrow, yay! Straight axle will be going in and mustang 2 front end coming out when the 3 feet of snow leaves my yard so i can get  to the big shop. one current picture and one the day i bought it in April. 

12
Non-FE Discussion Forum / Re: Anyone use Instagram?
« on: December 21, 2017, 10:27:46 AM »
following 8)

13
FE Technical Forum / 65 Fairlane with a mustang 2 front end. can i get an FE in there.
« on: October 30, 2017, 08:11:05 PM »
wondering if i can put an FE in my 65 Fairlane with a mustang 2 front end. should i just scrap the front end and get a strait axel?
a friend says he has a 4x4 oil pan, will this help? has anyone got any tips? link to album of the car, got a 428 on bank ready to go. thanks in advance!
https://goo.gl/photos/bRt5B81axRFioKD26

14
FE Technical Forum / Re: Keep the shorty headers, or move to FPA Tri-Y on my 428?
« on: August 29, 2017, 10:01:13 PM »
Like my FPA tri y in the Fairlane

15
FE Technical Forum / Re: After fire poping out headers
« on: March 15, 2017, 12:09:26 PM »
changing exhaust gaskets means pulling the motor and trans

Pages: [1] 2 3