If you are close to Ga. I have a105 that has been bored .060 and I have a good sonic test also .Just call me at 678 603 8400 Doug

The reman starter I had on the truck worked fine it was just difficult to get to.When I did get the powermaster installed it sounded bad .I wasnt going to wear my flexplate out so off it came .After I did some trimming on my headers and the truck both starter and header fit much much better .My c-6 had a leak so it had to come out .Everything is better now no leaks ! Fellows check my classified ad .This 428 I have has a lot of potential .Happy New Year !Doug

I picked up a #9106 powermaster starter at summit .it took me a couple of attempts to get it clocked correctly .But when I did I had a ton of room! Bolted it in wired it up hit the switch and it sounded terrible .Like a chevy that wasnt shimmed right .Took it back for a refund . Put my old reman and it sounde normal all is good .I did a little grinding on my headers and the truck as well  Everything fit better .I didnt need a starter after all .I have an almost new pioneer flexplate it never made a noise with my old starter .I called powermaster they said take it back no reason for the noise .All is well it just didnt work out .Thanks everyone .Doug

Have you considered a set of shorty headers ?Might save you some time and effort .Doug

I am just making an attempt to make this an easier job in the future .The header and starter have to come out together .I lucked out on my reman starter it is a good one just thinking of the future .I will look at thepowermaster .I have one of those on my comet with good luck and it fit my hedmans good .Thanks for the comments .Doug

You know 6667 when I got my 502 installed I had my old mickeys 29.5x9 stiff sidewall and used they worked better than my new 29x9 Hoosiers d06 compound .I tried everthing this past year .Sometimes it would hook 1.46 60 ft mostly NOT.I had the convertor loosened still spinning .In Ga. it is starting to rain I need one more test session before I just buy some new tires .I will go back to mickeys 3056 st.The Hoosiers fit much better but it seems they wont work with my car .Thanks for your info and I am thinking about that moving my spring also but first I will try different tires .Good luck to you Mr. Fairlane .Doug

I guessed that you had those springs moved .Somehow I am determined to get my car to work with those 9x29s .My loosened up convertor didnt help much either .So I plan to go back to some mickey thompson tires .I might consider a gear swap .I currently have 4.10s maybe a 3.90 or 3.70 gear is in my future .Thank you for sharing your info.Doug