Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 67 Fastback

Pages: [1] 2 3
1
FE Technical Forum / Re: throttle body vs carbureted CFM?
« on: July 26, 2014, 06:33:38 AM »
The progressive Tripower set up on my car works a treat 3 x 600 cfm throttle bodies . Has great throttle response and hang on when all 3 are open .

2
FE Technical Forum / Re: Mufflers
« on: March 14, 2014, 08:07:00 PM »
Love the sound of a strong Fe listening to the exhaust pulses and walking past feeling the pulses . Custom headers 3inch stainless with X pipe 4 custom stainless mufflers straight through with stainless wool packing . Best sounding car I have heard lately is the gold 427 67 mustang with Holman Moody signage on it .

3
FE Technical Forum / Re: The big score!
« on: March 09, 2014, 05:07:08 AM »
Jay ,  lock your doors ,it's good when parts go to the right person ,you here so many stories of good parts being dumped .

4
FE Technical Forum / Re: Engine masters on FE Power forum who have done EFI Conversion
« on: February 14, 2014, 10:06:12 PM »
I have had a Fast 2 system on my 433 FE with Tri Power fuel injection , it has been  up and running for 5 months it has been faultless . No doubt it is not a cheap setup to start with but the overall look is very impressive and the driving of it is bloody unreal . Very smooth in its operation and delivers the goods at WOT .

5
FE Technical Forum / Re: Aluminum Radiators & Electric Fans
« on: October 20, 2013, 07:47:08 PM »
I have just finished going through this whole process I used a AFCO dual pass which fitted between the rails I had to trim the radiator support purchased a Taurus fan as there was nothing available here in Australia that could match its airflow .We made a custom schroud ,the fan is controlled by the ECU on at 190 . With our high temperatures here at the moment it copes well while cruising on highway temps sit at 180 only in traffic does the fan come on and will cycle .

6
Member Projects / Re: 67 Mustang Fastback build
« on: September 23, 2013, 07:20:43 AM »

Car is now up and running it has gone through all the engineering certificates and road worthy certificates that are required over here to register a modified vehicle  . I am very pleased with the end result I don't have to tell you guys but this thing  sounds wicked and performance is quite scary ,once the outer throttle bodies open all hell breaks loose .
http://s1350.photobucket.com/user/markpacey/media/enginebay_zpsa54406a6.mp4.html
http://s1350.photobucket.com/user/markpacey/media/IMG_0245_zps5d8461b8.mp4.html
http://s1350.photobucket.com/user/markpacey/media/IMG_0268_zps51a97510.mp4.html

7
Member Projects / Re: 67 Mustang Fastback build
« on: August 19, 2013, 09:37:02 AM »
Sorry about the quality of video and yes we used deminalrised water to top up  radiator .
http://s1350.photobucket.com/user/markpacey/media/startup002_zpsdf0602f4.mp4.html

8
Member Projects / Re: 67 Mustang Fastback build
« on: August 18, 2013, 05:48:22 AM »
Today has been a great day another FE came to life oh what a sound i am pumped .It fired first twist of the key now to sought out some fuel maps  as it is running a bit on the rich side will ask my son for some help to post video of it running ..

9
Non-FE Discussion Forum / Re: Happy Easter to all my pals on the FE Power Forums! Project updates?
« on: April 02, 2013, 06:21:27 AM »
Happy Easter to all . I have been waiting on more parts and they have arrived Afco dual pass radiator and a Ford taurus electric fan .My son is making the mounts for the radiator and the new shroud we will then place the fan in the shroud . Picked up a oil cooler for the power steering and have fitted up the aircon condensor .A good weekend getting closer to firing it up .

10
FE Technical Forum / Re: CVR Electric Water Pump Adapters for the FE
« on: February 11, 2013, 08:03:57 AM »
Congratulations Jay,your engineering and technical skills you should be proud of ,not everyman is so blessed .In Australia we are also lucky to have guys with your dedication to the Ford Oval with a lot of new  Cleveland products being manufactured .All the best keep up the great work .

11
Member Projects / Re: 67 Mustang Fastback build
« on: February 06, 2013, 02:30:53 AM »
Jay the biggest issue i had was clearance around the power steering box i have fitted in the car .Lucky i have small hands and time .The right side looks ok so should'nt be a problem .

12
Member Projects / Re: 67 Mustang Fastback build
« on: February 05, 2013, 08:04:30 AM »
Fuel tank being trial fitted before welding top in place .

13
Member Projects / Re: 67 Mustang Fastback build
« on: February 04, 2013, 02:59:42 PM »
Everything clears fitted up the left bank extractors it is tight in there.my son and I made up a alloy fuel tank Saturday it is baffled and has a inbuilt pot for the pump to sit in.will post some photos soon.

14
Member Projects / Re: 67 Mustang Fastback build
« on: February 01, 2013, 05:18:18 AM »
Got some time to fit tailshaft and had to modify strut mount as the aircleaner was touching .Hope to fit up extractors saturday.

15
Member Projects / Re: 67 Mustang Fastback build
« on: January 30, 2013, 09:47:49 PM »
Have made progress and got  the engine and gearbox fitted yesterday .Stripped valve covers and aircleaner for more room .Wrapped the top end in glad wrap to keep it clean .A few photos more to come .

Pages: [1] 2 3