Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - racer

Pages: [1]
1
Member Projects / Re: my blown injected on alky flat bottom project
« on: August 15, 2012, 06:53:30 AM »
hope to pull it at barrys place soon,and no this will also have some lake fun but with the block full and the fact my bullet tank only holds a small amount of alky with to side saddle tanks and an electric pump to feel the buttet we can lake play some but limited.. jeff

2
Member Projects / Re: my blown injected on alky flat bottom project
« on: August 14, 2012, 09:27:24 AM »
431ci
d3te block filled to almost the deck and girdle installed
rpm crank
je 12-1 pistons
crower pro billit 6.7 rods chev  big end
comp roller and enduro lifters
melling hv pump blue printed
14qt dooley pan and pickup
rcd blower hub and nicoson front cover with stack enderle/river rat pumps
edel heads with triple springs and light port match work only milled .060
smith bros push rods
hd dove rockers with end stands
dove intake
mooneyham 6-71 stripped and anodized for alky
3300cfm bird enderle with square valve and high speed bypass setup
msd with 7 box and 2amp coil
rearward zoomies
thats the basics..
 jeff

3
Member Projects / Re: my blown injected on alky flat bottom project
« on: August 12, 2012, 08:46:37 PM »
figured out how to post a pic on here....my project. 431ci jeff

4
Private Classifieds / Re: Slightly O/T - Snap on tools, torque wrenches and valve seat cutter F/S
« on: August 05, 2012, 02:47:01 PM »
i will take the cutter..859-393-3410  jeff

5
Private Classifieds / Re: WTB 428 oil pump pick up
« on: July 09, 2012, 09:42:44 PM »
got your message..will send it out asap..good luck with your build..jeff

6
Member Projects / my blown injected on alky flat bottom project
« on: July 09, 2012, 04:52:44 PM »
below   

7
Private Classifieds / Re: WTB 428 oil pump pick up
« on: July 08, 2012, 07:21:47 PM »
got a brand new one i think out in the shop..if you want it you can have it for free. let me know. jeff

8
Private Classifieds / fec3ae-9425-k low riser 2x4 intake,carbs,air cleaner and valve covers SOLD THANK
« on: January 25, 2012, 12:44:19 PM »
see pic..not original carbs..1850s with some mods ..runs out real nice!  like efi.  air cleaner assy with an extra filter.intake is polished but could be soda blasted back to oem look..no repairs of anykind to my knowlage. ford motorsports finned "cobra lemans" covers with k/n breathers.
intake with carbs-$1000
air cleaner assy only sold after intake is sold-$100
valve covers with breathers,like new-$200

would be interested in partial trade for d3te or d4te  "105" block that cks out..again  must ck out to be usable to my specs

jeff leeke sr  859-393-3410  visa /mastercard ok.

Pages: [1]