1606
Member Projects / Re: FE Comet 1st place Detroit Autorama
« on: March 08, 2016, 09:35:49 PM »
Absolutely beautiful always nice when you do the work yourself and get an a-ok from your friends and peers, CONGRATS
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1607
Member Projects / Re: new member with factory fe 4 speed 66 caliente
« on: February 19, 2016, 12:11:10 AM »
Sounds great welcome a lot of information from here
1608
Non-FE Discussion Forum / Lights out
« on: February 18, 2016, 11:55:20 PM »
In Georgia motorsports raceway were they are having the small tire shootouts if you go to lights out 7 and go to the live feed that's a little over three hours there's a T BOLT at an hour and a half that ran a 5 flat at 137 in the eighth friggin thing sounds great and it honks. Is he someone from the forum. Look for Wednesday 1. Is there an FE in it and if there is did one of the big three or four builders build it
1609
Non-FE Discussion Forum / Re: Street Outlaws
« on: February 11, 2016, 11:50:08 AM »
The Pontiac motor is the last good thing. Having owned a 64 lemans for 14 years, and raced a 64GTO for 15 years. At least the crow looked like a street car.There aren't many street cars with tube chassis with funny car cages. Of course I am still gonna watch the show, it's just getting farther and farther away from street cars.
1610
Non-FE Discussion Forum / Re: 7 Second Cyclone
« on: January 29, 2016, 11:09:10 PM »
The main thing is that its ford powered
1611
Member Projects / Re: goosed
« on: January 24, 2016, 10:53:17 PM »
Thanks it was a long road getting back on road but makes ya feel young Everytime ya turn the key
1612
Member Projects / Re: goosed
« on: January 24, 2016, 09:14:10 PM »
Thanks Jay it's no SOHC but it's my baby and my first car, and been in my family since 1969. I have beaten many a chevy. Hoping for high 11s
1613
Member Projects / goosed
« on: January 21, 2016, 10:17:10 PM »
have about 400 miles on breakin and was the last day before I put it away for the winter thanks for all of your help guys. the new stang is a 2016 GT 350 runs 12.40s
https://youtu.be/P_oVCpQLEc8
https://youtu.be/VaK6Jd5dbSs
https://youtu.be/wc-KkxITQnU
https://youtu.be/P_oVCpQLEc8
https://youtu.be/VaK6Jd5dbSs
https://youtu.be/wc-KkxITQnU
1614
FE Technical Forum / Re: Installing the FE in a car
« on: January 09, 2016, 11:04:39 AM »
Paulie I used to do it your way for year and Ross put up those pictures and I just dropped my 485 into my 67 Stang and in half hour I was looking at it sitting in its new home, the way me and you were doing it it would take at least two and a half hours if you didn't want to scratch everything that you cleaned and painted I used to have nightmares about the bottom bolt on #7 cylinder with hooker 6114, that one bolt is almost as long as the whole install the new way. You will be very happy
1615
FE Technical Forum / Re: Fuel distribution in Ford Medium Riser intake manifold?
« on: January 07, 2016, 12:05:52 PM »
What's up guys I have noticed that 1 and 8 are leaner do I jet to get those cylinders to look right plug wise. Because I think it's a smidge rich already
1616
FE Technical Forum / Re: Holding 13:1 compression?
« on: December 08, 2015, 11:27:22 AM »
Thanks guys never too old to learn
1617
FE Technical Forum / Re: Holding 13:1 compression?
« on: December 07, 2015, 11:52:32 PM »
What kind of modifications need to be done to run E85
1618
Non-FE Discussion Forum / Re: Been a busy year.............
« on: December 07, 2015, 11:48:29 PM »
Beautiful up there good luck looks like a nice setup
1619
Non-FE Discussion Forum / Re: Precision oil pumps
« on: December 07, 2015, 11:45:07 PM »
Ordered twice from him talked to him personally both times 6 working days first time and 9 the next time . How late is he I would give him a call
1620
Private Classifieds / Re: wanted: quality floor shifter for a c6
« on: November 28, 2015, 05:50:54 PM »
Ya know I don't know if it's NHRA legal but I have been using hurst quarter stick for years past tech inspection at englishtown NJ raced almost every weekend for 10 years changed cable twice it stretches 50 bucks and a half hour and your done. Basic dependable shifter.