Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Stangman

Pages: 1 ... 103 104 [105] 106 107 ... 116
1561
FE Technical Forum / Holley 600 vac secondary 1850
« on: October 01, 2016, 10:05:37 PM »
Just a question guys . The metering plate that comes stock is that usually enough for WOT ,I never hear of anybody changing these, I looked in Jegs catalogue,what do you do change them like jets.

1562
The Road to Drag Week 2016 / Re: Drag Week, Day 4 and Day 5...
« on: September 17, 2016, 06:11:28 PM »
Congrats to everyone for a fine showing for the FE faithful. Glad that everything went well for you Doug sounds like you guys had a good time. Followed all of you guys during the week, a buddy of mine was driving a friend of his car that finished 3 cars ahead of you.

1563
The Road to Drag Week 2016 / Re: Drag Week update, Wednesday...
« on: September 15, 2016, 11:49:29 PM »
Way to go Doug keep up the good work

1564
The Road to Drag Week 2016 / Re: Drag Week 2016, Quick Update September 10
« on: September 12, 2016, 09:31:37 AM »
Hey Jay my buddy is there and he just sent me a video of you driving by him, sounds sweet

1565
I take it back ha ha

1566
16.78 @ 87 hey your there probably the most dependable

1567
The Road to Drag Week 2016 / Re: Drag Week 2016, Quick Update September 10
« on: September 11, 2016, 10:21:21 PM »
Yeah good luck guys give them hell

1568
Non-FE Discussion Forum / Re: C-6Trannys
« on: September 11, 2016, 03:03:59 PM »
Thanks Drew video does look pretty straight forward I have owned my own shop for 24 years and trannys besidesr&r I just don't do problem being if something weird happens being I don't know enough then I would be stuck I am sure I could get help at that point but feel uncomfortable

1569
Non-FE Discussion Forum / C-6Trannys
« on: September 11, 2016, 01:00:52 PM »
Ok might be a little long sorry. Back in 1989 sent my tranny out to be rebuilt, wasn't right took out and he said he fixed it put back in wasn't right took out put drum in for extra clutch disc and I believe he said check ball in wrong spot but he had tranny this time for almost 2 weeks. A little fed up called up Jegs bought super street fighter c-6 and that's been in there ever since. Now about a month ago I went to the track as a lot of you guys know and on third pass by accident after burnout didn't put tranny beck in first so started out in second and tranny started doing funny things when cold . The rest of that day it was fine except one time at the end of pass it downshifted like right  after I got out of it. When I shift manually it shifts fine, sounds like maybe I burned up some discs and got some stuff in valve body. Talked to a reputable tranny shop in area and said he would rebuild it for between 9 and 1100. Would rather sell my c-6 that's been in my garage that I never put back in and this tranny that I think needs a rebuild or something else since it shifts fine manually. And buy another Tci tranny. Question is what do you think these trannys are worth maybe 1000 for both and I will throw in 3000 stall Tci super street fighter torque converter. What do ya think

1570
From your lips to Gods ears, at least if you do have any problems you got most of them covered, with my luck no matter how much crap I brought it would be the one thing I didn't bring

1571
A long block and you can have a spare motor. Ha ha

1572
Thanks CJ  keep up the good work

1573
Curious as to what you did to secondary plates and I also notice were you have you temp sender is that accurate in that spot.or is it fine cause you have a  regular engine fan that spot won't work right for a temp sender for electric fans, or at least that's what I thought because I wanted to put sender there and thought not to

1574
Non-FE Discussion Forum / Re: 1967 GT 500 Shelby
« on: September 04, 2016, 12:07:11 AM »
I have been ar two shows and he doesn't have any paperwork other than a picture of Carroll Shelby in front of a 67 GT 500 that he says is his

1575
FE Technical Forum / Re: oil filters
« on: September 03, 2016, 06:37:30 PM »
I will double check when I get to work Tuesday but I believe in Wix the number is 51372 you can check yourself if you want

Pages: 1 ... 103 104 [105] 106 107 ... 116