Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Stangman

Pages: 1 ... 102 103 [104] 105 106 ... 116
1546
FE Technical Forum / Re: Pictures from the PRI show
« on: December 11, 2016, 06:26:48 PM »
Ok that makes sense, A friend of mines friend bought one of Bill Elliot's old motors and he put it in his AC Cobra it honked 10.65 in the quarter granny shifting sounded great

1547
FE Technical Forum / Re: Pictures from the PRI show
« on: December 11, 2016, 06:10:43 PM »
Ok I don't want to ask cause I feel like an FE guy but who is Ernie Elliot

1548
Non-FE Discussion Forum / Re: PRI 2016
« on: December 11, 2016, 06:00:30 PM »
Or if you watch football it took longer to move snow than to play the game

1549
FE Technical Forum / Re: BBM Heads-Block////Blue Thunder intakes-Heads
« on: December 11, 2016, 05:57:02 PM »
That's funny Barry but unfortunately true

1550
Non-FE Discussion Forum / Re: Torque wrench preferences
« on: November 30, 2016, 05:40:13 PM »
I used click type for years still have a couple but I did buy a digital snap-on that doesnt click it vibrates.
It gives you the amount of torque that you just did, (it flashes a couple of times). It was alittle weird at
first, but like anything else you get used to it.

1551
FE Technical Forum / Re: BBM Heads-Block////Blue Thunder intakes-Heads
« on: November 27, 2016, 07:48:38 PM »
Thanks guys it makes sense now

1552
FE Technical Forum / Re: BBM Heads-Block////Blue Thunder intakes-Heads
« on: November 27, 2016, 10:09:26 AM »
Nobody knows the answers to this question

1553
FE Technical Forum / BBM Heads-Block////Blue Thunder intakes-Heads
« on: November 26, 2016, 08:12:06 PM »
Just curious
Ok so maybe BBM stuff is on the way, but Blue thunder intakes seem like they make them in
Such small quantities. It doesn't make sense why wouldn't this company want to make more
Pieces, It seems when they do come out there gone in no time, do they not see this. Maybe I am misinformed and they are a small company and can't afford to make big batches of intakes and cylinder heads. It just seems like everyone on the two or three forums that most of us are on would like to see and purchase some of this stuff

1554
Non-FE Discussion Forum / Re: Auto Jigglers Pick Set
« on: November 09, 2016, 11:45:18 PM »
Thanks Felony its nice to see all the help you can get around here.

1555
Non-FE Discussion Forum / Re: Auto Jigglers Pick Set
« on: November 09, 2016, 05:07:52 PM »
I remember when those first came around also, there was a guy coming around that not only had those but it was a whole kit and it wasnt cheap of course because it just came out. I never could get the hang of it, I guess I would never be a good thief.

1556
Non-FE Discussion Forum / Re: OUCH! what this 427 Convert 1967 Fairlane race-car's owner must have screamed
« on: November 06, 2016, 10:05:08 PM »
Ouch is right the motor is worth more

1557
Drag Strip Results for FE Powered Vehicles / Re: 1967 fastback 485
« on: October 12, 2016, 09:51:02 PM »
Thanks guys

1558
Non-FE Discussion Forum / Drag strip
« on: October 12, 2016, 06:09:42 PM »
Just want to thank everyone that helped me a month ago with my traction issues. I bought those Caltrain shocks front and back, and installed new tranny and converter. Weird thing is it didn't rise as much in the front but the back didn't come up like it was so I got traction. I posted time slip and video in drag strip section. Video is of final round. Thanks guys couldn't have done it without ya

1559
Drag Strip Results for FE Powered Vehicles / 1967 fastback 485
« on: October 12, 2016, 05:29:54 PM »
485 c/o 2x4 lowriser twin 600 vac sec survival heads out of the box c-6 10 inch 3000 stall caltrac bars and shocks. ET drag radials 3250/3450 with me in it

link to final round win

https://www.youtube.com/watch?v=UZ6-xgbqvCA


 


1560
FE Technical Forum / Re: Holley 600 vac secondary 1850
« on: October 02, 2016, 07:15:00 PM »
Well I will play around with it without playing around with the float. That BP guy knows his shit, going to jet first then get vacuum reading and check power valve thanks guys

Pages: 1 ... 102 103 [104] 105 106 ... 116